User manual

- 9 -
stereo headset or stereo speaker with a 3.5mm to 3.5mm audio
cable. Now you can listen to music and control pause/play of music.
Function
Status of the receiver
Operation
Pause
Playing music
Short press button once
Play
Pausing
Short press button once
4. Reconnecting to a Bluetooth device
Automatic connecting
Every time the receiver is switched on, it will automatically
connect to last connected device.
Manual connecting
When the receiver is in standby mode and doesn’t connect to any
devices, short press button once, it will automatically
connected to last connected device.
5. Auto-off
The receiver will automatically switch off if no devices can be
connected within 5 minutes.
6. Clearing pairing list
Make sure the transmitter is off, press and hold button for
about 10 seconds, and release it until red LED is on for 1 second
and then blue LED is on for 1 second.
7. LED indicator
LED indicator
Status of the transmitter
Blue LED flashes continuously
Pairing mode
Blue LED flashes once every 1
second
Standby mode and not connected
to a device
Blue LED flashes twice every
4 seconds
Connected to a device
Red LED flashes
Low power