Operation Manual

5. Remove the top hinge pin and spring inside. Refit on to

the opposite side.

3. Place the two screws, the bottom bracket and the

levelling feet to one side.

4. Lift the door and place it on a padded surface to

prevent scratching it.

6. Set the door back on to the top hinge. Screw the

bottom hinge into place on the new side. Also screw in

the levelling foot.

7. Check that the door is aligned horizontally and

vertically and that the seals are closed on all sides

before finally tightening the bottom hinge. Re-adjust

the levelling feet.

INSTALLATION

LWC32B10_IB_final110309.indd 6 09/03/2011 11:43 AM