User's Manual

4) Left mouse click on Settings, this screen will appear. Check the screen resolution is set to
a level that can be displayed by your television (refer to the technical specification for details).
You can adjust the resolution by moving the slider on screen.
5) Left mouse click on Advance, this screen will appear, click on tab called ‘Monitor’
6) Left click on the drop down for Screen refresh rate and select 60 Hertz.
7) Finally click Apply, then click Yes and the settings will be saved.
8) Turn off your PC.
9) Connect up your LCD TV to your PC and switch on.
10) Switch on your PC, Windows will automatically Install the LCD TV.
For Windows Vista operating system the process is very similar to the above.
If you require additional support please contact the helpline.
29
Connecting to a PC - Windows
Satety WarningsIntroducing the LCD TVInstalling the LCD TVUsing The FeaturesTroubleshootingSpecifications
new logik style english manual 2Page 1 4. 7. 2008 9:51:16