Quick Start

3
Got everything?
• 1 x Smartphone
• 1 x Projector holder
• 1 x External power supply – USB Universal – (Model: TPA-67050150VU; 5V 1500mA) (Shenzhen TIANYIN
Electronics Co., Ltd; 9 SANZHULI Industrial Area, SHIYAN Zhen, BAOAN District, Shenzhen, Guangdong, PRC.)
• 1 x USB cable
• 1 x Case
• 1 x Cleaning wipe
• 1 x Cap
• 1 x Quick start guide
• 1 x Pedestrian kit
NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not part of this
product.
WARNING: For your safety, please do not remove the screen's protective film, located under the
antistatic film (with tab). It protects your screen against slight scratches and provides optimum
protection if the phone is dropped.
Logicom accepts no responsibility for personal injury sustained following removal of the protective film by the
consumer. Note that this protective film does not increase the robustness of the product. For replacement of
the protective film, please consult a specialist Smartphone dealer.
Installation guide
1. Description of the Smartphone
1 – Front camera
2 – Rear camera & flash
3 – Volume
4 – ON/OFF button
5 – Jack
6 – Micro USB port
7 – Speakers
8 – Fingerprint Sensor
9 – Projector
2. Inserting a SIM card
Your Smartphone is a mobile phone with dual SIM card, which enables you to use two lines on the same Smartphone.
Your smartphone has two SIM slot.
To insert the SIM card(s):
• Switch off the phone and remove the SIM compartment with a pin.
• Insert the SIM card correctly into the relevant card slots (see figure below). Observe the direction of
insertion of cards, the contacts to the outside.
• SIM 1 uses a Micro-SIM card, and SIM 2 uses a Nano-SIM card.