Operation Manual

8 – Modifying the remote code

The default remote access PIN code is 0000. (Not to be mixed up with the base's PIN

code)

CAUTION: If you modify the remote access PIN code, be sure to keep it written

down. If forgotten, the warranty will not cover such an oversight.

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "CHANGE PIN"

"PIN? ----- " is displayed on the screen, type in the 4-number remote

consultation code using the alphanumeric keys (0000 by default)

"NEW PIN? ----- " is displayed on the screen, type in the new remote

consultation code.

"CONFIRM? ----- " is displayed on the screen, type in the new remote

consultation code a second time, a beep confirms the remote

consultation code change.

Note: When restoring the factory settings, the default remote access code (0000) is

automatically reactivated.

Voicemail

Voicemail is a service available on request from your operator.

This service becomes the answering machine for your phone line.

The icon is displayed on the screen to let you know one or several messages have

been left on your operator's voicemail.

To listen to you new messages, you must call the voicemail number given to you by

your operator.

1 – Changing the voicemail access number

By default, no number is registered.

Enter the menu and, using the DOWN key, select the menu "HS

SETTINGS"

Select "MAILBOX"

Using the alphanumerical keypad, dial the new number

123