Operation Manual

5 – Setting the answering machine delay.

When activated, the answering machine is prompted after 2, 4, 6 or 8 rings, depending

on the setting.

The answering machine can also be prompted when in the Call saver mode ("TIME

SAVER").

The Call saver mode is used to prompt the answering machine, using remote access,

after 2 rings if there are new messages saved on it and after 6 rings if there are no new

messages. Therefore, if the answering machine does not start after the second ring, you

can hang up and save the cost of a useless call.

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "ANSWER DELAY"

Select either "2 RINGS", "4 RINGS", "6 RINGS", "8 RINGS" or "TIME

SAVER", a beep will confirm your choice

6 – Setting the length of a message.

This setting allows you to determine the maximum length of a message left by the

caller.

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "RECORD TIME"

Select either "60s", "120s", "180s" or "UNLIMITED"; a beep will confirm

your choice

7 – Activate/Deactivate remote access

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "REMOTE ACC"

Choose either:

"ON": to activate remote consultation

"OFF": to deactivate remote consultation

A beep will confirm your choice