Operation Manual

Answering machine settings

For all answering machine settings, your handset must be in idle mode (no tones)

1 – Selecting the answering machine mode (Recorder/Answering

machine only)

There are two answering machine modes:

Recorder mode: Allows your correspondent to leave a message

Answering machine only: Does not allow your correspondent to leave a message, but

invites them to call back later. (This mode is automatically activated when the memory

is full)

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "ANSWER MODE"

Choose between "ANSWER ONLY" and "ANS & REC", a beep will

confirm your choice.

2 – Default recorded messages

There are 2 default outgoing messages (pre-recorded) in French and English, one for

the answer and record and the other for the answer only. These outgoing messages are

automatically activated if you do not record a personal message for the selected mode.

The default message for the answer and record is: "Hello, your call cannot be taken

at the moment, so please leave your message after the tone"

The default message for the answer only is: "Hello, your call cannot be taken at the

moment and you can’t leave a message, so please call later"

To hear the default outgoing messages, follow the procedure "Listen to a recording" if

you have not recorded a personal message.

2-1 Choosing the language for the default outgoing messages