Operation Manual

37
5 – Deleting all messages and memos
Enter the menu and use the DOWN key to select the "ANS MACHINE"
menu
Select "DELETE ALL"
"CONFIRM?" is displayed on the screen
"EMPTY" is displayed on the screen when all messages have been
deleted.
6 – Remote access
6-1 Using remote access
Caution: Remote access can only be used if this function is activated (see
Activating/Disabling remote access in Answering machine settings)
NOTES:
- The remote access function may not work on certain "BOX" hubs
- Telephoning from a direct tone dial line
- If you are using a switchboard, you must use a beeper (not provided)
If the telephone line is using pulse dialling, a beeper must be used (not included).
To access your messages:
• Enter your telephone number
• While the message is playing, press key * on your telephone, then compose your 4-
figure remote access code (0000 by default)
 A short beep is emitted
 Press key 5 to start listening to messages and/or press the key corresponding to the
desired function:
Key
Function
2
Delete the message currently being played
4
Listen again to the current message or press twice for the previous
message
5
Listen to messages
6
Listen to the next message
7
Activate the answering machine service (see next chapter)
8
Stop message playback
9
Disable the answering machine service (see next chapter)
Note:
After 5 seconds of key inactivity, the answering machine automatically cuts off
communication.