Operation Manual

Enter the menu and, using the DOWN key, select the menu "BS

SETTINGS"

Select "DELETE HS"

"PIN?-----" appears on screen, enter the PIN code using the

alphanumeric keys (the default PIN code is 0000)

"HANDSET 1" is displayed on the screen

Select the handset to be deregistered

"REGISTER" appears on the deregistered handset

4 – Setting the flashing period (R)

The R key allows you to access certain services provided by your operator.

Contact your operator for more information concerning these services.

WARNING: Default settings depend on your country of residence. In England, the

flashing period is set to "SHORT" (100ms).

Certain services may not operate for a short or long period, such as your operator's call

signal management, for example.

Nevertheless, for telephones installed with certain PABX standards, setting it to

MEDIUM or LONG may be essential.

LONG: 600ms

MEDIUM: 270ms

SHORT: 100ms

Enter the menu and, using the DOWN key, select the menu "BS

SETTINGS"

Select "FLASH TIME"

Select a period ("LONG", "MEDIUM" or "SHORT"), a beep confirms the

validation

5 – Setting the dialling mode

You can select the type of call dialling from your telephone. We strongly recommend

using the "TONE" tone dialling mode (default mode) which is fast and practical

(moreover, pulse dialling does not permit certain answering machine functions, bank

card services or voicemail).

123