Operation Manual

19
6 – Paging Handset
This function allows you to call all handsets registered to a base.
This is useful if you have misplaced a handset.
• All handsets must be idle (no tone).
• Quickly press the REGISTRATION key located on the base (Refer to chapter
"Description of the base").
• All handsets associated to the base emit a beep and
"PAGING" appears on the screens of all the handsets.
• To stop the beep, press any key on the handsets or press the registration key
located on the base.
7 – Conversation time counter
The conversation time counter is automatically activated when dialling or after 15
seconds of conversation after receiving a call, in hours: minutes: seconds (e.g. 01:34:45
for 1 hour 34 minutes and 45 seconds)
After the call, the conversation time remains on the screen for 5 seconds.
Directory
To configure or modify the directory, the handset must be idle (no tone).
1 – Adding a contact
You can save up to 20 contacts in the alphanumeric directory.
Each contact can include up to 12 characters per name and 20 figures per number.
Note: - A name must be entered.
- If you try to save a contact under an existing name, "NAME EXISTED"
will appear to indicate that you must change the name.
To save a new contact (name and number) in the directory, follow the instructions
described in chapter "Adding a contact to the directory" in the "Installation and
start-up guide"
2 – Searching in the directory
Direct access
Enter the directory; the first contact appears on screen
Navigate through the contacts
You can enter the first letter of the name desired; the telephone will take
you directly to the first name in the list which starts by that letter.
Allows you to see the telephone number saved for that contact
Allows you to call the selected contact
ABC