Operation Manual

3 – Included in box

 1 handset

 1 base

 2 400mAh Ni-Mh rechargeable batteries

 1 mains adaptor

 1 telephone cable

Installation and start-up guide

Before use, choose an appropriate surface on which to place your telephone base.

Ensure that it is not close to another telephone or any other electric devices (computer,

television, etc.) to avoid interference.

1 – Installing your telephone

2 – Installing and charging rechargeable batteries

Installation:

- Insert the 2 batteries (Type AAA Ni-MH/400mAh)

into the compartment. Respect the polarity indication.

- Close the battery compartment using the

flap provided with the batteries in the packaging

Note: When the handset is charging the icon flashes permanently.

When the icon stops flashing, the batteries are fully charged.

Caution: If you do not leave the handset to charge for 24 hours for the first time, it will

never reach its full capacity.

The warranty does not cover problems relating to incomplete charging before first use.

A- Connect the mains input socket to the

modular slot behind the base. Then connect the

mains adaptor (VT04EUK06045 output 6V

DC/450mA) to the 100-240 V AC 50/60 Hz

power-supply.

Repeat the process with the other adaptors

(VT04EUK06045 output 6V

DC/450mA) on the charging bases.

B- Connect the telephone cable to the modular

slot behind the base and the other end to the

telephone wall socket

Charging the batteries:

Before use, batteries must be charged (for the first time)

for at least 24 hours.

- Place the handset on the charging base, a confirmation

signal will be heard.

- Leave the batteries to charge uninterrupted for at least

24 hours.

In MANTA 250 and 350 packs each

additional handset comes with the

following elements:

 1 additional charger

 2 rechargeable batteries

 1 mains adaptor