Operation Manual

8
2 – Installing and charging rechargeable batteries
Installation:
- Insert the 2 batteries (Type AAA Ni-MH/400mAh)
into the compartment. Respect the polarity indication.
- Close the battery compartment using the
flap provided with the batteries in the packaging
Note: When the handset is charging the icon flashes permanently.
When the icon stops flashing, the batteries are fully charged.
Caution: If you do not leave the handset to charge for 24 hours for the first time, it will
never reach its full capacity.
The warranty does not cover problems relating to incomplete charging before first use.
Important: When batteries are low, the volume may vary; recharge the batteries to
reset the volume.
3 – Basic set-up
3-1- Navigating through the menus
Set up and customise your telephone, display the menu by clicking
"OK".
Navigate through the list; click on UP and DOWN keys
Confirm your choice or display a sub-menu
Return to the previous menu
Exit the list and return to the home screen
3-2- Modifying the ringtone
You can select a ringtone from the 10 different ringtones available for
external calls and another for internal calls. There are 5 classic and 5
polyphonic ringtones to choose from.
Enter the menu and select the "HS SETTINGS" menu using the
DOWN key
Charging the batteries:
Before use, batteries must be charged (for the first time)
for at least 24 hours.
- Place the handset on the charging base, a confirmation
signal will be heard.
- Leave the batteries to charge uninterrupted for at least
24 hours.