Operation Manual

CAUTION: In certain cases, after having listened to all your operator's voicemail

messages, the icon remains displayed on the screen. To make it disappear, simply

follow the instructions described in chapter "Deleting the entire call log" and this

procedure will also allow you to erase the call log and erase the icon .

A beep will be heard during or after the call:

 Recharge the handset batteries.

 Stand closer to the base.

The handset cannot detect the base:

 You are out of range; you must stand closer to the base.

 Reattach the base's power cord correctly.

 Take the batteries out of the handset and put them back again.

 Disconnect the mains adaptor from the base, then reconnect it.

The dialling tone is not audible:

 Check that the telephone line is correctly connected to the base.

2 – Name or number presentation function

 Access to the Name presentation service is subject to subscription registration

with your operator (subject to your operator's technical availability).

 Access to the Number presentation service is subject to subscription

registration with your operator (subject to your operator's technical availability).

 If you have subscribed to name or number presentation, the date (day/year) and

time will be updated by the network after every received call.

3 – Answering machine functions

Faulty sound:

 Record the message again, this time louder.

The answering machine no longer accepts any messages:

 Check that the answering machine is in service.

Some messages have not been entirely recorded:

 The caller's voice was too low, the machine stopped recording.

 The caller stopped speaking for over 5 seconds during the recording of the

message, so the machine automatically stopped the recording.

 The caller started speaking before the beep.

 The answering machine's memory reached full capacity during the conversation.

For remote use (consultation, activation, etc.), be sure to follow these

instructions:

 A direct line at voice frequency (VF) must be used.

 If you call via a switchboard, a beeper must be used (not included).

 If the telephone line is using pulse dialling, a beeper must be used (not included).

 The remote consultation code is not typed in properly or is incorrect.

The answering machine cannot be activated remotely:

 The memory is full (the viewer displays "FF"), all messages must be listened to

and deleted.

 The remote consultation code is not typed in properly or is incorrect.

"PB FULL" is permanently displayed on the handset: