Operation Manual

2 – Default recorded messages

There are 2 default recorded messages (pre-recorded) in French and English, one for

the recorder and the other for the answering machine only. These recorded messages

are automatically activated if you do not record a personal message for the selected

mode.

The default message for the recorder is: "Hello, your call cannot be taken at the

moment, so please leave your message after the tone"

The default message for the answering machine only is: "Hello, your call cannot be

taken at the moment and you can’t leave a message, so please call later"

To hear the default recorded messages, follow the procedure "Listen to a recording" if

you have not recorded a personal message.

2-1 Choosing the language for the default recorded messages

The default answering machine messages are available in 2 languages: French and

English. The recorded message played will be in the selected language.

The default language is French.

Enter the menu and use the DOWN key to select the "ANS MACHINE"

Select "TAM SETTINGS"

Select "LANGUAGE TAM"

Choose between "FRENCH" and "ENGLISH", a beep will confirm your

choice

2-2 Restoring default recorded messages

The default recorded messages (pre-recorded) remain in the device's memory.

 While the personal message (see following chapter "Listen to a recording ")

corresponding to the selected mode (Recorder/Answering machine only) is

playing, press key "C"to delete it.

The default message corresponding to the selected mode will automatically be reset