Operation Manual

3 – Manual registration of a handset with the base

You can associate up to 5 handsets with the base.

• Press down the registration key located on the base for 10 seconds (Refer to

chapter "Description de la base"). Your base is now in registration mode. Follow the

registration procedure for the handset to be associated.

Procedure for manual registration of a MANTA handset with the

base

Enter the menu and use the DOWN key to select the "REGISTRATION"

"PIN? -----" appears on screen, enter the PIN code using the

alphanumeric keys (the default PIN code is 0000)

"WAIT" is displayed on the screen. When "HANDSET X" appears on the handset

screen (X corresponds to the number of the handset on the base), the additional

handset is associated to the base.

Note:

- Once the handset has been associated to the base, the base automatically stops the

association mode. To associate other handsets, follow the same procedure.

- If you do not associate a handset within a 2 minute period, the association mode will

automatically stop.

4 – Disassociating a handset from the base

This function will allow you to delete a handset saved on your base, so as to replace it.

If there is only one handset saved to the base, it cannot be deleted.

A handset can only be removed using another handset saved to the same base.

Enter the menu and, using the DOWN key, select the menu "BS

SETTINGS"

Select "DELETE HS"

"PIN?-----" appears on screen, enter the PIN code using the

alphanumeric keys (the default PIN code is 0000)

"HANDSET 1" is displayed on the screen

Select the handset to be disassociated

"REGISTER" appears on the disassociated handset

123