User manual

6
It is possible to increase the internal memory of the Smartphone device with
a MicroSD card. (Maximum 32GB MicroSD card).
 Switch off the phone and remove the rear cover and battery.
 Insert the memory card into the relevant slot.
 Then replace the battery and cover.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the
Smartphone to be completely switched off.
4. Charging the battery
Installing the battery:
 Remove the rear cover of your
Smartphone.
 Insert the battery ensuring that the image
shown here is facing you.
 Replace the rear cover of the
Smartphone.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type.
Model: V395271ART (Li-+ion – 3,8V –
2150mAh)
To replace the battery, please enquire with the
after-sales service of your dealer.
Dispose of used batteries according to the instructions.
To replace the battery, please enquire with the after-sales service of your
dealer.
Dispose of used batteries according to the instructions.
Charging the battery:
 To charge the battery, connect the USB cable (supplied) to the USB port
of your Smartphone and the other end to the mains adaptor (supplied).
Then connect the mains adaptor to a power outlet.
 The battery charge icon illuminates during charging and indicates the
charge status.
 When the battery is fully charged, you can disconnect the USB cable
from the device then from the power outlet.
IMPORTANT:
 The Smartphone is only recharged via its USB port.