Quick Start
Table Of Contents
- Trademarks
- Got everything?
- Installation guide
- Getting Started
- Warning on using the phone while driving
- Listening safety
- Electromagnetic waves safety information (SAR)
- Safety and care information
- Epilepsy warning
- Technical informations
- Recycling
- Simplified EU declaration of conformity
- The warranty scope of application
5
Switch off the phone and remove the
rear cover and battery.
Insert the SIM card correctly into the
relevant card slots (see figure below).
Observe the direction of insertion of
cards, the contacts to the outside.
SIM 1 and SIM 2 use a Micro-SIM card.
CAUTION : The 3G function can only be
used on one SIM card.
Then replace the SIM compartment in place.
3. Inserting a MicroSD
It is possible to increase the internal memory of the Smartphone device with a
MicroSD card. (Maximum 32GB MicroSD card).
Switch off the phone and remove the rear cover and battery.
Insert the memory card into the relevant slot.
Then replace the battery and cover.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the
Smartphone to be completely switched off.
4. Charging the battery
Installing the battery:
Remove the rear cover of your Smartphone.
Insert the battery ensuring that the image shown
here is facing you.
Replace the rear cover of the Smartphone.
CAUTION: Risk of explosion if battery is replaced by
an incorrect type.
Model: 455056ART (Li-ion – 3,8V – 1500mAh)
To replace the battery, please enquire with the after-sales service of your dealer.
Dispose of used batteries according to the instructions.