Photo representative only QUICK START GUIDE Logicom Le Prime Smartphone GPS/WIFI/BT/GSM/3G/4G-LTE
Trademarks Android, Google, Google Play and other marks are trademarks of Google LLC. Adobe Flash Player Copyright(C) 1996-2011 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://MPEGLA.COM SD, SDHC, microSD and the microSDHC logos are trademarks of SD-3C, LLC. The Twitter name, logo, Twitter T, Tweet, and Twitter bird are trademarks of Twitter, Inc. in the United States and other countries.
Got everything? 1 x Smartphone 1 x Chargeur adaptateur secteur – USB universel – (Model: DCS380501000E; 5V 1A) (SHENZHEN EAST SUN ELECTRONIC CO., LTD; Building B, No. 88, Xingye Road One, Fenghuang First Industrial Park, Fuyong Sub-district, Baoan District, Shenzhen City, Guangdong Province, P.R.China.) 1 x USB cable 1 x Quick start guide 1 x Pedestrian kit NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not part of this product.
Installation guide 1. Description of the Smartphone. 1 – Front camera 2 – Rear camera & flash 3 – Volume 4 – ON/OFF button 5 – Jack 6 – Micro USB port 7 – Speakers 2. Inserting a SIM card Your Smartphone is a mobile phone with dual SIM card, which enables you to use two lines on the same Smartphone. Your smartphone has two SIM slots (SIM 1 and SIM 2). To insert the SIM card(s): Switch off the phone and remove the rear cover and battery. Insert the SIM card correctly into the relevant card slots.
3. Inserting a MicroSD It is possible to increase the internal memory of the Smartphone device with a MicroSD card. (Maximum 32GB MicroSD card). Switch off the phone and remove the rear cover and battery. Insert the memory card into the relevant slot. Then replace the battery and cover. CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be completely switched off. The SIM slot 2 is shared with the MicroSD slot, so you use a card (Nano SIM or microSD) at a time.
IMPORTANT: The Smartphone is only recharged via its USB port. Ensure your Smartphone is fully discharged before charging it for the first time. The battery must be charged for at least 5 to 8 hours when first charged. After a long period without use, It should be necessary to do many cycles of charging / discharging to obtain maximum power capacity Note: You can use the device when it is being charged. In this case, the battery may take longer to charge fully.
restart the Smartphone or unplug the mains adaptor from the power outlet then plug it in again. Remove when it’s possible the battery when the Smartphone is not used during a long period. Dispose of the battery and the Smartphone separately. Do not pu the battery in the household waste, for further information about recycling of the battery, contact your municipality, your local waste or the store where you purchased the product. Getting Started 1.
3. Locking / unlocking the screen To unlock the screen: Press the power key on your phone. Hold and drag the unlock icon to the right to unlock the device. You can configure the screen lock by adding a password or pattern to be replicated when unlocking your Smartphone. CAUTION: Forgetting your screen lock password, PIN code or pattern permanently blocks your Smartphone If this is forgotten or lost, the product warranty will not cover such an oversight. Even a “reset” cannot solve the problem.
4. Receiving a call When a call is received, slide your finger over the When you want to end a call, press the icon. icon. 5. Enable / Disable the Wi-Fi connection NOTE: To limit your exposure to electromagnetic fields we recommend you disable Wi-Fi when not in use. In the settings, press to activate the Wi-Fi. The device automatically searches the available Wi-Fi networks. Click on the network of your choice to activate it and connect to it.
Press to turn on / off Wi-Fi Once the Wi- Fi enabled, the icon appears in your notification bar 6. Enable / Disable Bluetooth connection NOTE: To limit your exposure to electromagnetic fields we recommend you disable Bluetooth when not in use. In the settings, press to activate the Bluetooth. You can also activate this function from the notifications panel.
Press to turn on / off Bluetooth Once the Wi- Fi enabled, the icon appears in your notification bar 7. Reset If you want to reset your smartphone, you can do a reset of data from the operating system Android. CAUTION: A reset data erase all your personal data, all contacts in your phone and the applications you have installed. That is why we recommend that you make a backup of your data before starting the procedure. However the information stored on the external memory card will not be erased.
Reset the device in “recovery mode”: Switch off your device and then hold the "On / Off" button and press the Volume "-" button. After 3 seconds, the picture appears, release the buttons. Press the "On / Off" button and press the Volume "+" button to appear the “Factory Mode” menu. This menu is not tactile. To navigate, use the Volume button to move. To validate an action, use the "On / Off" button. Select “wipe data/factory reset”, follow Confirm, the smartphone will reset.
NOTE: The availability of access to Google Play Store depends on your phone operator and the country in which you are located. Access to the online store requires an account to be created. NOTE: LOGICOM shall under no conditions be responsible for the content on the on-line store. The product warranty will not cover any malfunction due to an application from on-line stores.
Do not use pre-amplified or amplified models of headphones or earphones (i.e. with individual volume control and/or self-powered by batteries), as they do not ensure adherence to the maximum volume. To prevent possible hearing damage, do not listen at high volume levels for long periods. Electromagnetic waves safety information (SAR) Your Smartphone is designed to not exceed the radio wave limits recommended by the European authorities.
Body-worn SAR testing has been carried out at a separation distance of 5 mm. This device is in accordance with the regulations regulating the exposure at radio frequencies when it is used at a minimal distance of 5 mm from the body. NOTE: The SAR value may vary, depending on national reporting and testing requirements and the network band. NOTE: Do not use your Smartphone in certain locations such as aircraft, hospitals, service stations and professional garages or while driving a vehicle.
Follow all these instructions. Heed the warnings. Clean only with a soft cloth (dry or slightly damp). Do not attempt to disassemble the device; it would no longer be covered by the warranty. Do not bring sharp objects directly into contact with the surface and do not spray any cleaning product directly onto the screen. Do not exert excessive pressure on the screen and do not put objects on it. This could damage the screen. Use the spare parts specified by the manufacturer.
Do not expose the product to water droplets or to splashes and do not place any object filled with liquid, such as a vase, on the device. Do not use the product near flammable or explosive materials. The power plug is used to disconnect the device and must always be easily accessible. In order to completely disconnect the device from the electricity supply, the power plug must be disconnected from the power outlet.
in your family has ever had symptoms related to epilepsy (seizures or loss of consciousness) when exposed to flashing lights, consult your doctor prior to playing. We advise that parents should monitor the use of video games by their children. If you or your child has the following symptoms while playing a video game, discontinue use IMMEDIATELY and consult your doctor: dizziness, blurred vision, eye or muscle twitches, loss of consciousness, disorientation, any involuntary movement or convulsion.
The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.
The warranty scope of application If you encounter any problems: A contact form and complete FAQ are available on our website: www.logicom-europe.com If none of these platforms does solve your problem, contact your retailer. The LOGICOM supplier warranty is valid for normal use of the device as defined in the instructions. This warranty excludes damage caused by external circumstances.
The legal warranty for hidden defects applies in compliance with Articles 1641 et seq. of the French Civil Code. Made in PRC © 2019 Logicom SA.
