Quick Start

Installation guide

1. Description of the Smartphone.

1 – Front camera

2 – Rear camera & flash

3 – Volume

4 – ON/OFF button

5 – Jack

6 – Micro USB port

7 – Speakers

2. Inserting a SIM card

Your Smartphone is a mobile phone with dual SIM card, which enables you to use two lines on the same Smartphone.

Your smartphone has two SIM slot.

To insert the SIM card(s):

 Switch off the phone and remove the SIM compartment with a pin.

 Insert the SIM card correctly into the relevant card slots (see figure

below). Observe the direction of insertion of cards, the contacts to

the outside.

 SIM 1 uses a Nano-SIM card, and SIM 2 uses a Micro-SIM card.

WARNING : The 3G/4G function can only be used on one SIM card.

 Then replace the SIM compartment in place.

3. Inserting a MicroSD

It is possible to increase the internal memory of the Smartphone device with a MicroSD card (Maximum 32GB

MicroSD card).

 Switch off the phone and remove the rear cover and battery.

 Insert the memory card into the relevant slot.

 Then replace the battery and cover.

WARNING: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be completely switched

off. The SIM slot 1 is shared with the MicroSD slot, so you use a card (Nano SIM or microSD) at a time.