Quick Start

7
Charging the battery:
To charge the battery, connect the USB cable (supplied) to the USB
port of your Smartphone and the other end to the mains adaptor
(supplied). Then connect the mains adaptor to a power outlet.
The battery charge icon illuminates during charging and indicates
the charge status.
When the battery is fully charged, you can disconnect the USB
cable from the device then from the power outlet.
IMPORTANT:
The Smartphone is only recharged via its USB port.
Ensure your Smartphone is fully discharged before charging it for
the first time.
The battery must be charged for at least 5 to 8 hours when first
charged.
After a long period without use, It should be necessary to do many
cycles of charging / discharging to obtain maximum power capacity
Note: You can use the device when it is being charged. In this case, the
battery may take longer to charge fully.
Safety information for charging the battery:
To recharge the battery, only use the mains adaptor supplied with
your device. Do not use any other power supply or electrical device.
The power outlet to which the device is connected must be near the
equipment and must always be easily accessible.
Always wait at least 5 seconds after switching off the device before
restarting it. Switching the device off and then back on again
immediately may damage the electrical circuits.
Do not disassemble, open or shred the battery contents. Do not
dispose of batteries in fire or water. Do not charge the battery if the
room temperature exceeds 45° C. Keep the battery in a clean and
dry place. Avoid leaving the battery under sunlight.