QUICK START GUIDE Logicom Le HELLO Photo representative only Smartphone 4G-LTE/GPS/WIFI/BT
Trademarks Android, Google, Google Play and other marks are trademarks of Google LLC. Adobe Flash Player Copyright(C) 1996-2011 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Got everything? • • • • • 1 x Smartphone 1 x Chargeur adaptateur secteur – USB universel – (Model: DCS38-0501000E; 5V 1A) (SHENZHEN EAST SUN ELECTRONIC CO., LTD; Building B, No. 88, Xingye Road One, Fenghuang First Industrial Park, Fuyong Subdistrict, Baoan District, Shenzhen City, Guangdong Province, P.R.China.) 1 x USB cable 1 x Quick start guide 1 x Pedestrian kit NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not part of this product.
3. Inserting a MicroSD It is possible to increase the internal memory of the Smartphone device with a MicroSD card. (Maximum 32GB MicroSD card). • Switch off the phone and remove the rear cover and battery. • Insert the memory card into the relevant slot. • Then replace the battery and cover. CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be completely switched off. The SIM slot 2 is shared with the MicroSD slot, so you use a card (Nano SIM or microSD) at a time. 4.
• • • • • • • • • • The power outlet to which the device is connected must be near the equipment and must always be easily accessible. Always wait at least 5 seconds after switching off the device before restarting it. Switching the device off and then back on again immediately may damage the electrical circuits. Do not disassemble, open or shred the battery contents. Do not dispose of batteries in fire or water. Do not charge the battery if the room temperature exceeds 45° C.
You can configure the screen lock by adding a password or pattern to be replicated when unlocking your Smartphone. CAUTION: Forgetting your screen lock password, PIN code or pattern permanently blocks your Smartphone If this is forgotten or lost, the product warranty will not cover such an oversight. Even a “reset” cannot solve the problem. As a precaution, take a note of your password or pattern. PASSWORD: _________________ 4.
Press to turn on / off Wi-Fi Once the Wi- Fi enabled, the icon appears in your notification bar 7. Enable / Disable Bluetooth connection NOTE: To limit your exposure to electromagnetic fields we recommend you disable Bluetooth when not in use. In the settings, press to activate the Bluetooth. You can also activate this function from the notifications panel. Press to turn on / off Bluetooth Once the Wi- Fi enabled, the icon appears in your notification bar 8.
Reset the device in “recovery mode”: Switch off your device and then hold the "On / Off" button and press the Volume "-" button. After 3 seconds, the picture appears, release the buttons. Press the "On / Off" button and press the Volume "+" button to appear the “Factory Mode” menu. This menu is not tactile. To navigate, use the Volume button to move. To validate an action, use the "On / Off" button. Select “wipe data/factory reset”, follow Confirm, the smartphone will reset.
Warning on using the phone while driving In France, in accordance with Article R412-6-1 of the French highway code, drivers are not permitted to use handheld phones whilst the vehicle is moving. The penalty for non-compliance with this article is a fine and point penalty on your driving licence. It is also forbidden to wear any system such as earphones, pedestrian kits, headsets, headphones, susceptible to limit the attention or the hearing of the drivers. NOTE: this legislation applies only in France.
Electromagnetic waves safety information (SAR) Your Smartphone is designed to not exceed the radio wave limits recommended by the European authorities. These limits include safety margins to ensure the protection of all persons regardless of their age or health. The SAR (specific absorption rate) of mobile phones quantifies the maximum level of exposure of the user to electromagnetic waves, for aural use. French legislation stipulates that the SAR must not exceed 2 W/kg averaged over 10g of tissue.
Do not expose the device to direct sunlight or other source of extreme heat or cold. Respect the privacy of others when using your Smartphone. Keep the device away from all metal objects (coins, keys, etc.). Do not leave near a magnetic field as this could cause data to be lost or could damage the device. Do not drop the device. Do not expose the device to shocks, friction or impact. In order to prevent data loss, remember to make a (computer or paper) back-up of information saved on the device.
Technical informations Technologies 2G Frequency range GSM900 – DCS 1800 3G WCDMA 900 – WCDMA 2100 4G LTE LTE FDD Band 1 / 3 / 7 / 20 Bluetooth 2402MHz ~ 2480MHz Wifi 2.4 Ghz 2412MHz ~ 2472MHz Transmit power max E-GSM900: 33.03 dBm DCS1800: 29.83 dBm WCDMA 2100: 22.74dBm WCDMA 900: 22.80dBm LTE FDD Band 1: 23.06 dBm LTE FDD Band 3: 23.99 dBm LTE FDD Band 7: 22.72 dBm LTE FDD Band 20: 22.60 dBm GFSK: 6.77dBm (EIRP) π/4 DQPSK: 6.29dBm (EIRP) 8DPSK: 5.67dBm (EIRP) 802.11b: 12.90 dBm (EIRP) 802.
Simplified EU declaration of conformity Hereby, LOGICOM SA – 55 rue de Lisbonne – 75008 PARIS, declare that the radio equipment type smartphone GPS/FM/WIFI/BT/GSM/3G/4G-LTE model Le HELLO is in compliance with Directive 2014/53/UE. The full text of the EU declaration of conformity is available at the following internet address: https://www.logicom-europe.com/ce-doc The warranty scope of application If you encounter any problems: A contact form and complete FAQ are available on our website: www.
