Photo representative only User Guide Mobile phone GSM/BT Le Fleep 178 * Please find the latest versions of our user manual on our website http://www.logicom-europe.
Introduction Thank you for choosing this digital mobile phone with color screen. Read this manual in order to fully understand and use your GSM mobile phone. You will appreciate its features and just how easy it is to use. The mobile phone with color screen is designed for a GSM network environment. This is a dual-Sim Stand-by phone, but it is impossible to use the second SIM card when a call is in progress with the first SIM card.
Please read before using Safety and care information Read these instructions carefully. Keep these instructions. Follow all these instructions. Heed the warnings. Clean only with a soft cloth (dry or slightly damp). Do not attempt to disassemble the device; it would no longer be covered by the warranty. Do not bring sharp objects directly into contact with the surface and do not spray any cleaning product directly onto the screen.
This product is not a toy and requires adult supervision NOTE: In order to reduce any risk of fire or electric shock: Do not expose this device to rain or moisture. Do not expose the product to water droplets or to splashes and do not place any object filled with liquid, such as a vase, on the device. Do not use the product near flammable or explosive materials. The power plug is used to disconnect the device and must always be easily accessible.
Package contents 1 x Phone 1 x Charger - Model: GLY-B05050L / 5.0V / 500mA -Produced by Shenzhen Guangliyuan Electronic Co.,LTD. (NO.2 B2 Building,No.62 Industrial avenue, Fuchengao Industrial zone, Pinghu Street, Longgang District, Shenzhen, China) 1 x Earphone 1 x User guide NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not part of this product. Installing SIM card and memory card 1.
2. Inserting and removing the SIM card The metal contact surface of the SIM card can be scratched easily. Remove the SIM card from its support carefully before installing it. Turn off the phone; remove the back cover, battery or any other external power supply. Insert the normal side (without angled edge) of the SIM card into the cavity provided for this purpose, with the metal contacts facing downwards. Insert the second SIM car in the same way.
Recommendation: This manual does not provide any additional information on inserting the second SIM card. Refer to the general instructions for inserting a SIM card. If you insert only one SIM card, some of the options on the menu will not be available. 3. Memory card Insert the card into the memory card reader following the steps below Remove the back cover from the phone, and then remove the battery.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Model: BL-5C / Batterie rechargeable Li-ion (3.7V) / 800mAh To replace the battery, please enquire with the after-sales service of your dealer. Dispose of used batteries according to the instructions. Charging the battery: To charge the battery, connect the USB cable (supplied) to the USB port of your Feature phone and the other end to the mains adaptor (supplied). Then connect the mains adaptor to a power outlet.
Always wait at least 5 seconds after switching off the device before restarting it. Switching the device off and then back on again immediately may damage the electrical circuits. Do not disassemble, open or shred the battery contents. Do not dispose of batteries in fire or water. Do not charge the battery if the room temperature exceeds 45° C. Keep the battery in a clean and dry place. Avoid leaving the battery under sunlight. Do not short circuit the battery.
card. Contact your network operator for more information. PIN 2 code: Input your PIN 2 code to use certain services such as a service call. If you input the PIN2 code incorrectly three times in succession, input the PUK2 code to unlock the SIM card. Contact your network operator for more information. PUK code To change the locked PIN code, input the PUK (Personal Unlock Key) code. Usually PUK2 code and SIM card are provided together. Otherwise, contact your network operator.
Main menu To Lock/Unlock the keyboard, press the menu key (1) then the star key (2). To Turn on/Turn off the phone, press the On/Off key (3) for a long time. 1 2 1. Messaging 1.1. Write message Compose a new message, insert a number and other 1.2. Inbox All messages received are saved in this inbox. 1.3. Outbox Outbox holds the messages that failed to be sent. 1.4. Drafts This function allows you to retrieve the SMS that you have saved. 1.5.
2. Contacts You can save a phone number in the memory of the phone or in the SIM cards. New: Create a new contact Write message: Send a message to the contact Call: Call the contact Delete: Delete the selected contact Delete multiple: Delete several selected contacts Delete all Delete phone Delete SIM1 Delete SIM2 Import/Export: Move the contacts between the phone and the SIM card Add to blacklist Others 3.
5. MultiMedia 5.1. Camera 5.2. Image 6. Settings 6.1. Call settings Dual SIM: Activate SIM1 only / SIM2 only / Dual-SIM mode Call divert: Set the message sending for the 2 SIM card Call waiting Call barring Hide ID 6.2.
Backlight Keypad backlight time 6.4. Security PIN: Activate/deactivate or change the PIN code. If PIN code verification is activated, you must input your PIN code each time the phone is started. Modify PIN 2: Activate/deactivate or change the PIN code 2 Phone locked: lock the phone with a password. The phone's initial password is 0000 Modify the privacy password Privacy Auto keypad lock Lock screen by end-key Blacklist 6.5.
World clock Bluetooth: Check ‘Bluetooth’ and ‘Bluetooth visibility’ to activate the Bluetooth function, then search for the compatible Bluetooth equipment in ‘Paired device’, finally connect the equipment by choosing Pair. Tip: When you don’t use the Bluetooth function, be sure to turn it off by unchecking "Bluetooth" in this menu. Torch: Turn on or turn off the electrical torch 9.
Recycling The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.
Listening safety Before using the pedestrian kit, check that the volume is not set to maximum to prevent hearing loss. The high volume settings are intended for individuals with reduced hearing capacity and not for those with normal hearing. Do not use the pedestrian kit while driving. Adjust the volume so that you can hear the sounds around you. Listening at high volumes can damage your hearing and lead to hearing impairment (deafness, ringing ears, tinnitus and hyperacusis).
Electromagnetic waves safety information (SAR) Your device is designed to not exceed the radio wave limits recommended by the European authorities. These limits include safety margins to ensure the protection of all persons regardless of their age or health. The local Specific Absorption Rate (SAR) quantifies the user's exposure to electromagnetic waves from the equipment concerned. The maximum authorized SAR is 2 W / kg for the head and trunk or 4 W / kg for the limbs, averaged over 10g of tissue.
NOTE: Do not use your mobile phone in certain locations such as aircraft, hospitals, service stations and professional garages or while driving a vehicle. The electromagnetic waves from the mobile phone can disrupt the performance of electronic devices used in these locations. We recommend that you switch off your phone or switch it to flight mode in these locations to avoid interference. If you use an electronic implant (pacemaker, insulin pump, neurostimulation, etc.).
Epilepsy warning Please read before using a video game or allowing your children to use one. Some people are susceptible to epileptic seizures or loss of consciousness when exposed to certain flashing lights or light patterns in everyday life. Such people may have a seizure while watching television images or playing certain video games. This may happen even if the person has no medical history of epilepsy or has never had any epileptic seizures.
Technical information’s : Technologies 2G Bluetooth Frequency range GSM900 – DCS 1800 2402MHz ~ 2480MHz Transmit power Max 2W / Max 1W 1.85mW PIRE (e.i.r.p) 2.68 dBm EIRP Information of charger: Manufacturer’s name and address Shenzhen Guangliyuan Electronic Co.,LTD. (NO.2 B2 Building, No.62 Industrial avenue, Fuchengao Industrial zone, Pinghu Street, Longgang District, Shenzhen, China GLY-B05050L 100-240V 50-60Hz 5V 0.5A 2.5W 73.3% 0.
Signages Conformity to European directives (CE) Conformity to Waste Electrical and Electronic Equipment (WEEE ou W3E) Directive 2012/19/EU product recycling guideline. Indicates that the device should not be thrown in the trash and must be recycled according to local laws. Product compliant with the IEC 60417– 5957; indoors use only. Adaptator with double insulation electrical protection which does not require a security ground connection.
Simplified EU declaration of conformity : Hereby, LOGICOM SA – 55 rue de Lisbonne – 75008 PARIS, declare that the radio equipment type feature phones GSM/BT model Le Fleep 178 is in compliance with Directive 2014/53/UE. The full text of the EU declaration of conformity is available at the following internet address: https://www.logicom-europe.
The warranty scope of application If you encounter any problems: A contact form and complete FAQ are available on our website: www.logicom-europe.com If none of these platforms does solve your problem, contact your retailer. The LOGICOM supplier warranty is valid for normal use of the device as defined in the instructions. This warranty excludes damage caused by external circumstances.
