Quick Start

Installation guide

1. Description of the Smartphone.

1 – Front camera

2 – Rear camera & flash

3 – Volume

4 – ON/OFF button

5 – Jack

6 – Micro USB port

7 – Speakers

2. Inserting a SIM card

Your Smartphone is a mobile phone with dual SIM card, which enables you to use two lines on the same Smartphone.

Your smartphone has two SIM slots (SIM 1 and SIM 2).

To insert the SIM card(s):

 Switch off the phone and remove the rear cover and battery.

 Insert the SIM card correctly into the relevant card slots.

Observe the direction of insertion of cards, the contacts to

the outside.

 SIM 1 uses a micro-SIM card and SIM 2 uses a micro-SIM

card.

CAUTION: The 3G function can only be used on one SIM card.

 Then replace the SIM compartment in place.

3. Inserting a MicroSD

It is possible to increase the internal memory of the Smartphone device with a MicroSD card. (Maximum 32GB

MicroSD card).

 Switch off the phone and remove the rear cover and battery.

 Insert the memory card into the relevant slot.

 Then replace the battery and cover.

CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be completely switched

off.

4. Charging the battery

Installing the battery:

 Remove the rear cover of your Smartphone.

 Insert the battery ensuring that the image shown here is facing you.

 Replace the rear cover of the Smartphone.

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Model: M45009D (Li-ion – 3,8V – 2000mAh)

To replace the battery, please enquire with the after-sales service of your dealer.

Dispose of used batteries according to the instructions.