Quick Start

6
 Insert the SIM card correctly into the relevant card slots. Observe the direction of
insertion of cards, the contacts to the outside.
 SIM 1 uses a micro-SIM card and SIM 2 uses a micro-SIM card.
CAUTION: The 3G function can only be used on one SIM card.
 Then replace the SIM compartment in place.
3. Inserting a MicroSD
It is possible to increase the internal memory of the Smartphone device with a MicroSD card.
(Maximum 32GB MicroSD card).
 Switch off the phone and remove the rear cover and battery.
 Insert the memory card into the relevant slot.
 Then replace the battery and cover.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be
completely switched off.
4. Charging the battery
Installing the battery:
 Remove the rear cover of your Smartphone.
 Insert the battery ensuring that the image shown here is
facing you.
 Replace the rear cover of the Smartphone.
CAUTION: Risk of explosion if battery is replaced by an incorrect
type.
Model: M45009D (Li-ion – 3,8V – 2000mAh)
To replace the battery, please enquire with the after-sales service of
your dealer.
Dispose of used batteries according to the instructions.
Charging the battery:
 To charge the battery, connect the USB cable (supplied) to the USB port of your
Smartphone and the other end to the mains adaptor (supplied). Then connect the
mains adaptor to a power outlet.
 The battery charge icon illuminates during charging and indicates the charge status.
 When the battery is fully charged, you can disconnect the USB cable from the device
then from the power outlet.
IMPORTANT:
 The Smartphone is only recharged via its USB port.
 Ensure your Smartphone is fully discharged before charging it for the first time.
 The battery must be charged for at least 5 to 8 hours when first charged.