Quick Start

6
3. Inserting a MicroSD
It is possible to increase the internal memory of the Smartphone device with
a MicroSD card. (Maximum 32GB MicroSD card).
 Switch off the phone and remove the rear cover and battery.
 Insert the memory card into the relevant slot.
 Then replace the battery and cover.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the
Smartphone to be completely switched off. The SIM slot 2 is shared with the
MicroSD slot, so you use a card (Nano SIM or microSD) at a time.
4. Charging the battery
Installing the battery:
 Remove the rear cover of your
Smartphone.
 Insert the battery ensuring that the
image shown here is facing you.
 Replace the rear cover of the
Smartphone.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type.
Model: V425880AR (Li-ion – 3,8V –
2750mAh)
To replace the battery, please enquire with
the after-sales service of your dealer.
Dispose of used batteries according to the
instructions.
To replace the battery, please enquire with
the after-sales service of your dealer.
Dispose of used batteries according to the
instructions.
Charging the battery:
 To charge the battery, connect the USB cable (supplied) to the USB port
of your Smartphone and the other end to the mains adaptor (supplied).
Then connect the mains adaptor to a power outlet.
 The battery charge icon illuminates during charging and indicates the
charge status.