Photo representative only QUICK START GUIDE Smartphone GPS/WIFI/BT/GSM/3G/4G-LTE Le Connect You can find our latest user manual on our website http://www.logicom-europe.
Trademarks Google, Android, Google Play and other marks are trademarks of Google LLC. Adobe Flash Player Copyright(C) 1996-2011 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://MPEGLA.COM SD, SDHC, microSD and the microSDHC logos are trademarks of SD-3C, LLC. The Twitter name, logo, Twitter T, Tweet, and Twitter bird are trademarks of Twitter, Inc. in the United States and other countries.
Got everything? 1 x Smartphone 1 x AC adapter charger – USB – (Model: DCS38-0501000E; 5V 1A) (SHENZHEN EAST SUN ELECTRONIC CO., LTD; Building B, No. 88, Xingye Road One, Fenghuang First Industrial Park, Fuyong Sub-district, Baoan District, Shenzhen City, Guangdong Province, P.R.China.) 1 x USB cable 1 x Quick start guide 1 x Pedestrian kit NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not part of this product.
Installation guide 1. Description of the Smartphone. 1 – Front camera 2 – Rear camera & flash 3 – Volume 4 – ON/OFF button 5 – Jack 6 – Micro USB port 7 – Speakers 2. Inserting a SIM card Your Smartphone is a mobile phone with dual SIM card, which enables you to use two lines on the same Smartphone. Your smartphone has two SIM slots (SIM 1 and SIM 2). To insert the SIM card(s): Switch off the phone and remove the rear cover and battery. Insert the SIM card correctly into the relevant card slots.
3. Inserting a MicroSD It is possible to increase the internal memory of the Smartphone device with a MicroSD card. (Maximum 32GB MicroSD card). Switch off the phone and remove the rear cover and battery. Insert the memory card into the relevant slot. Then replace the battery and cover. CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be completely switched off. The SIM slot 2 is shared with the MicroSD slot, so you use a card (Nano SIM or microSD) at a time.
When the battery is fully charged, you can disconnect the USB cable from the device then from the power outlet. IMPORTANT: The Smartphone is only recharged via its USB port. Ensure your Smartphone is fully discharged before charging it for the first time. The battery must be charged for at least 5 to 8 hours when first charged.
Significant electromagnetic interference or electrostatic discharge may cause malfunction or loss of data. If the device is not working properly, restart the Smartphone or unplug the mains adaptor from the power outlet then plug it in again. Remove when it’s possible the battery when the Smartphone is not used during a long period. Dispose of the battery and the Smartphone separately.
The "emergency call" function enables you to call an emergency number without entering the PIN code. 3. Locking / unlocking the screen To unlock the screen: Press the power key on your phone. Hold and drag the unlock icon to the right to unlock the device. You can configure the screen lock by adding a password or pattern to be replicated when unlocking your Smartphone.
4. Receiving a call When a call is received, slide your finger over the When you want to end a call, press the icon. icon. 5. Enable / Disable the Wi-Fi connection NOTE: To limit your exposure to electromagnetic fields we recommend you disable Wi-Fi when not in use. In the settings, press to activate the Wi-Fi. The device automatically searches the available Wi-Fi networks. Click on the network of your choice to activate it and connect to it.
Press to turn on / off Wi-Fi Once the Wi- Fi enabled, the icon appears in your notification bar 6. Enable / Disable Bluetooth connection NOTE: To limit your exposure to electromagnetic fields we recommend you disable Bluetooth when not in use. In the settings, press to activate the Bluetooth. You can also activate this function from the notifications panel.
Press to turn on / off Bluetooth Once the Wi- Fi enabled, the icon appears in your notification bar 7. Reset If you want to reset your smartphone, you can do a reset of data from the operating system AndroidTM. CAUTION: A reset data erase all your personal data, all contacts in your phone and the applications you have installed. That is why we recommend that you make a backup of your data before starting the procedure. However the information stored on the external memory card will not be erased.
Reset the device in “recovery mode”: Switch off your device and then hold the "On / Off" button and press the Volume "-" button. After 3 seconds, the picture robot appears, release the buttons. Press the "On / Off" button and press the Volume "+" button to appear the “Factory Mode” menu. This menu is not tactile. To navigate, use the Volume button to move. To validate an action, use the "On / Off" button. Select “wipe data/factory reset”, follow Confirm, the smartphone will reset.
NOTE: To access Google Play will depend on your phone operator and the country in which you are located. Access to the on-line store requires an account to be created. NOTE: LOGICOM shall under no conditions be responsible for the content on the on-line store. The product warranty will not cover any malfunction due to an application from on-line stores.
This product complies with the EN62368-1:2014 standard in accordance with the order of 25 July 2013 implementing Article L. 5232-1 of the French public health code concerning portable audio players. Do not use pre-amplified or amplified models of headphones or earphones (i.e. with individual volume control and/or self-powered by batteries), as they do not ensure adherence to the maximum volume. To prevent possible hearing damage, do not listen at high volume levels for long periods.
The maximum SAR level of your Smartphone is given in the following table: Position Connectivity SAR value Head GSM900 / DCS1800 / WCDMA900 / WCDMA2100 / 0.659 W/kg LTE 800 / LTE 1800 / LTE 2100 / LTE 2600 Trunk GSM900 / DCS1800 / (Separation WCDMA900 / WCDMA2100 / 1.854 W/kg distance 5 mm) LTE 800 / LTE 1800 / LTE 2100 / LTE 2600 Limbs GSM900 / DCS1800 / (Separation WCDMA900 / WCDMA2100 / 3.
Advice to reduce the level of exposure to radiation: Please use your Smartphone where reception is good to reduce the quantity of radiation received (avoid using in an underground car park or when travelling (train or car)). A reception icon indicates the quality of reception on your phone. A 4- full display means that reception is good . Use of a pedestrian kit also allows the level of exposure to be reduced.
or if the device has been exposed to rain or moisture, or has been dropped. Do not expose the device to direct sunlight or other source of extreme heat or cold. Respect the privacy of others when using your Smartphone. Keep the device away from all metal objects (coins, keys, etc.). Do not leave near a magnetic field as this could cause data to be lost or could damage the device. Do not drop the device. Do not expose the device to shocks, friction or impact.
Switch off the device in places presenting risk of explosion and when travelling by plane. Do not touch the power cord with wet hands and do not pull on the charger to disconnect it. The power cord must be placed so that it will not be stepped on or crushed particularly at the outlet, where it is plugged in or where it is connected to the device. Do not overload the power outlet. Use the power supply only as indicated.
Technical informations Technologies 2G 3G 4G LTE Frequency range GSM900 – DCS 1800 WCDMA 900 – WCDMA 2100 LTE FDD Band 1 / 3 / 7 / 20 Bluetooth 2402MHz ~ 2480MHz Wifi 2.4 Ghz 2412MHz ~ 2472MHz Transmit power max GSM900: 2074mW PIRE (e.i.r.p) 33.17dBm DCS1800: 941.88mW PIRE (e.i.r.p)29.74dBm WCDMA900: 187.06mW PIRE (e.i.r.p)22.72dBm WCDMA2100: 191.4mW PIRE (e.i.r.p)22.82dBm band1: 220.8mW PIRE (e.i.r.p)23.44dBm band3:199.6 mW PIRE (e.i.r.p)23.03dBm band7: 217.3mW PIRE (e.i.r.p)23.37dBm band20: 186.
Information of charger Manufacturer’s name and address SHENZHEN EAST SUN ELECTRONIC CO., LTD; (Building B, No. 88, Xingye Road One, Fenghuang First Industrial Park, Fuyong Subdistrict, Baoan District, Shenzhen City, Guangdong Province, P.R.China.) Model identifier Input voltage Input AC frequency Output voltage Output current Output power Average active efficiency No-load power consumption DCS38-0501000E 100-240V 50-60Hz 5.0V 1.0A 5.0W 77.726% 0.
information please contact your local authority or the retailer where the product was purchased. Product disposal instructions for business users: Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal. Signages Conformity to European directives (CE) Conformity to Waste Electrical and Electronic Equipment (WEEE ou W3E) Directive 2012/19/EU product recycling guideline.
Simplified EU declaration of conformity Hereby, LOGICOM SA – 55 rue de Lisbonne – 75008 PARIS, declare that the radio equipment type smartphone GPS/WIFI/BT/GSM/3G/4G-LTE model Le Connect is in compliance with Directive 2014/53/UE. The full text of the EU declaration of conformity is available at the following internet address: https://www.logicom-europe.com/ce-doc V04WL The warranty scope of application If you encounter any problems: A contact form and complete FAQ are available on our website: www.
• The warranty does not cover damage to the product due to misuse, including in particular those caused by objects, a pressure drop. • The warranty does not cover any use of the label with the precautions outlined in the manual. • The warranty does not cover defects caused to the product with another product connected or used with an accessory or software not provided by British Telecom. • The warranty does not cover any damage to the battery.
