Operation Manual

FX 600
Notice d’utilisation
- 9 -
4 466.04375 8 466.09375
6.5 Interference eliminator code
The interference eliminator code helps to minimise external communication
interferences. For each channel you can use an interference eliminator code between 1 and 38.
To select an interference eliminator code from a channel
1. Press the MENU/ key and the code will start to flash.
2. Press the or key to select the code.
3. Press the PTT key to validate.
Note To communicate with radios that don’t use an interference code eliminator, you must
set the latter to zero (0) on your FX 600 radio.
6.6 Channel search
 To carry out a search
• - Press the MON/ key briefly.
• The indicator will appear on the screen and the radio will start displaying
the channel combinations.
• When the radio detects activity on a channel, current search will stop to allow
you to listen to the call.
• You can also speak by pressing the PTT key.
 To stop the current search
- Press the MON/ key briefly.
6.7 Group search
In the group search mode, the radio only carries out searches on channels belonging to
your group.
 To add a channel to the group
1. Your radio is on standby mode.
2. Press the MENU/ , key six times. The current channel number and a sign
will appear on-screen.
3. Press the key or to change the ‘-‘sign into ‘y’.
4. Press the PTT key to validate.

Activate the group search