Operation Manual

FX 600
Notice d’utilisation
- 7 -
5 SETTING UP YOUR APPLIANCE
Before using your radio please read this manual carefully to ensure you take full advantage of
its functionality and use it safely.
5.1 Installation of the rechargeable Ni-MH battery
1. Press the key situated on the back of the appliance and lift the battery latch up
to release the battery cover.
2. Remove the battery from its protective bag.
Do not disassemble or open the battery.
Insert the Ni-MH battery ensuring that its contacts touch the metal parts of
the appliance.
3. Reposition the battery cover.
5.2 Installation of non rechargeable batteries
1. Press the key situated on the back of the appliance and lift the battery latch up to
release the battery cover.
2. Insert four alkaline AAA batteries as described inside the battery compartment whilst
ensuring to respect the polarities.
3. Reposition the battery cover.
Caution: Never charge alkaline AAA batteries
5.3 Battery charge level
The battery icon shows the battery charge level from empty to full .
The radio will frequently emit a sound signal to inform you that the battery is empty (Once
you have released the PTT key). The radio turns off automatically when the charge level is
too low.
5.4 Charging the FX 600 battery
• Insert the jack card into the power supply situated on the charger.
• • Connect the mains adaptor to the mains socket (220
V ~ ).
• Insert the radio into the charging desk stand (see
opposite)
• The red light alert will appear.
Note The light alert on the desk stand will remain on even
when the batteries are charged.
5.5 Turning the appliance on and off
• To turn on the radio