Manualshelf

Operation Manual

ManualsBrandsLogicom ManualsphonesFX-600
6789101112131415
FX 600
Notice d’utilisation
- 12 -
7.3 Removing a channel from the search list
This function allows you to remove a channel when you are in the search mode.
so you don’t have to listen to the communication on that particular channel and can continue
searching on other channels.
Removing a channel from the search list
1. You are in channel search mode. The alarm appears.
2. You radio detects a call on a channel that you don’t want to listen to.
3. Hold the or key to remove this channel from the search list.
4. le canal est alors retiré et la recherche se poursuit.
The channel will then be removed and you can continue your search.
Note
NoteNote
Note
Once you’ve started your search, you cannot remove the channel on which your
appliance is set.
To re-enter the channel into the search list
The channel will be re-entered into the list once you’ve stopped the search by
pressing the MON/ key.
7.4 Sound surveillance monitor
Your radio can be used for sound monitoring
.
This function allows your radio to transmit sounds that it detects to other radios which are set
on the same channel and have the same interference eliminator code.
To activate this function.
1. • Turn off your radio.
2. Switch on the radio by pressing the PTT key.
3. An «IVOX» icon appears on the screen to indicate that the function is activated.
4. To transfer a call, speak directly into the microphone without pressing the PTT key.
CAUTION: Pressing the PTT key once will deactivate the function, and the IVOX icon
will start to flash.
To re-activate the function, press the PTT key briefly and the IVOX icon will
stop flashing.
CAUTION:
This product is by no means a replacement for an adult’s protection and
surveillance of children.
Note:
When you use this function, there is a slight delay in between the time you start
speaking and when the appliance starts to emit.
7.5 Hands Free function
Your can use your FX 600 in hands free mode.
1. Switch off your appliance
2. Take off the protection cover and insert the audio accessory into the cable port.