Operation Manual

FX 600
Notice d’utilisation
- 10 -
1. Your radio is on standby mode.
2. Press the MENU/ key seven times. A ‘-‘ and ‘GP’ sign (for Group) will appear
on the screen.
3. Press the or key to change the sign ‘-‘ into ‘y’.
4. Press the PTT key to validate.
To launch the search, press the MON/ key.
 To return to normal search mode
1. Your radio is on standby mode.
2. Press the MENU/ key seven times. A ‘-‘ and ‘GP’ sign (for Group) will appear
on the screen.
3. Press the or key to change the ‘-‘ into ‘y’.
4. Press the PTT key to validate.
Note If the group doesn’t have any channel or only the current channel, the search will run
like a normal search.
6.8 Advanced search
If the radio stops the search on a channel that you don’t want to listen to, press the or
key briefly to re-launch the search until you reach the next active channel.
6.9 Radio broadcast range
Your radio has been designed to give maximal transmission performance and therefore
increase the communication broadcast range.
Do not use the radios for distances less than 1,5 M.
The radio transmission range varies depending on the surrounding area. In an open and
flat area, the conversation range can go as far as 6 Km. The range is reduced if there are
obstacles between radios.
6.10 Call tone.
6.10.1 Setting and transmitting call tones
Your radio is capable of transmitting a call tone to other radios that are set on the same
channel and the same interference eliminator code, to warn them that you wish to speak to
them. You can choose from 10 call tones.

Settings.