FX 600 ² FX 600 Transmitter - Receiver User manual Non-contractual photo Please read this booklet carefully before installing your appliance.
FX 600 0979 CERTIFICATE OF COMPLIANCE We, Logicom – 74 rue de la Belle Etoile – Z I Paris Nord – B P 58338 – 95941 ROISSY CDG France (Tel: +33 (0)1 48 63 77 64, Fax:+33 (0)1 48 63 82 47) 01.48.63.82.47) Hereby declare that the FX 600Walkie-talkie product (PMR) belonging to the trademark LOGICOM is compliant with the following necessary applicable requirements: Protection of the user’s health and safety. - EN60950 (2000) Radio requirements - EN300296-1 v1.1.1 (2001-03) - EN300296-2 v1.1.
FX 600 Contents 1 2 PRESENTATION OF THE FX 600 ............................................................................... 4 SAFETY AND GENERAL INFORMATION............................................................... 4 2.1 Safety and general information .................................................................................. 4 2.2 Necessary manual steps.............................................................................................. 4 3 PRECAUTIONS FOR USE.....................
FX 600 1 PRESENTATION OF THE FX 600 FX600 products are intended for family or group use during games and leisure time. 2 SAFETY AND GENERAL INFORMATION Important safety information and guidelines for optimal use of the FX 600 Please read this information prior to using the FX 600: 2.1 Safety and general information 1. Do not open the appliance. All alterations to the appliance are prohibited and shall render the guarantee invalid. 2.
FX 600 3 PRECAUTIONS FOR USE 1. Never throw the battery or batteries into fire. It is highly probable that this could cause an explosion and/or rejection of highly toxical products. 2. Do not expose the appliance to the sun or cold for extended periods of time. 3. Do not immerse the appliance into water nor use it in humid or wet conditions. 4. Do not expose the appliance to fire or any other dangerous environments. For example, in service stations or in areas where explosive products are used.
FX 600 7. The key To decrease • The channel number • Interference eliminator code 8. Loudspeaker 9. Charging desk stand 10.Listening Port 11. Display screen 12.The ‘Vol +’ key Decreases the volume. 13.The MON/ key Checks the activity on channels Searches for a correspondent. 14. The key Increases • The channel number • Interference eliminator code 15.Microphone 4.1 Icon display key.
FX 600 5 SETTING UP YOUR APPLIANCE Before using your radio please read this manual carefully to ensure you take full advantage of its functionality and use it safely. 5.1 Installation of the rechargeable Ni-MH battery 1. Press the key situated on the back of the appliance and lift the battery latch up to release the battery cover. 2. Remove the battery from its protective bag. Do not disassemble or open the battery.
FX 600 Press and hold the MENU/ key • To turn off the radio Press and hold the MENU/ key 6 Using the FX 600 6.1 SPEAKING AND LISTENING To communicate, all group members must have their radios set on the same channel and the same interference eliminator code. 1. To speak, press and hold the PTT key. 2. When you have finished speaking, release the PTT key.
FX 600 4 466.04375 8 466.09375 6.5 Interference eliminator code The interference eliminator code helps to minimise external communication interferences. For each channel you can use an interference eliminator code between 1 and 38. To select an interference eliminator code from a channel 1. Press the MENU/ key and the code will start to flash. 2. Press the or key to select the code. 3. Press the PTT key to validate.
FX 600 1. Your radio is on standby mode. 2. Press the MENU/ key seven times. A ‘-‘ and ‘GP’ sign (for Group) will appear on the screen. or key to change the sign ‘-‘ into ‘y’. 3. Press the 4. Press the PTT key to validate. To launch the search, press the MON/ key. To return to normal search mode 1. Your radio is on standby mode. 2. Press the MENU/ key seven times. A ‘-‘ and ‘GP’ sign (for Group) will appear on the screen. 3. Press the or key to change the ‘-‘ into ‘y’. 4.
FX 600 1. When the radio is switched on, press the MENU/ key twice. • The icon will appear on the-screen. 2. Press the or key to choose or listen to the tones that are numbered from 1 to 10. 3. • Press the PTT key to validate. Transmission. To transmit your call tone to other radios, press the key. Note To deactivate the call tone, you must set it to zero. 6.10.2 Transmitting an end-of-call tone This function allows your correspondent to be alerted by an audible beep once you have finished speaking.
FX 600 7.3 Removing a channel from the search list This function allows you to remove a channel when you are in the search mode. so you don’t have to listen to the communication on that particular channel and can continue searching on other channels. Removing a channel from the search list 1. You are in channel search mode. The alarm appears. 2. You radio detects a call on a channel that you don’t want to listen to. 3. Hold the or key to remove this channel from the search list. 4.
FX 600 3. 4. 5. 6. 7. Switch on the appliance and the VOX icon will appear on the screen. Lower the sound volume before listening. Adjust the sound volume to your particular preference. Speak into the microphone to transmit Messages may be received once the user stops speaking Note The hands free Kit is not provided with this appliance. 7.6 Set the level of sensitivity in hands free mode.
FX 600 Note You cannot use the hands free and sound surveillance mode whilst the stopwatch mode is in use. main libre, et le mode moniteur de surveillance sonore. 7.8 Energy saving Your appliance has an energy saving function You can enable your radio to switch off automatically when it is switched on and hasn’t been used for a long period of time, by following the following procedure: 1. Press the MENU/ key four times and a ‘P’ will appear on the screen. 2.
FX 600 9 Warranty information The LOGICOM supplier warranty is applicable for normal use of the device as set out in the user manual. Damage to this appliance caused by external factors is not covered by the warranty.
