Quick Start Guide

3
However if you have a MicroSIM card, use only the included adaptor.
Warning: Use only the included adaptor. Do not insert the empty adaptor into the SIM card port.
It will damage the connector of the SIM card port.
Any damage due to misuse will not be taken under warranty.
How to insert your MicroSIM card into the adaptor:
The adaptor is designed to block the MicroSIM in order to ease the insertion in the smartphone.
The oblique corner of the MicroSIM should correspond to the oblique corner of the adaptor.
Once the MicroSIM inserted, it must be held perfectly then you can insert it in your smartphone.
3. Inserting a MicroSD card
It is possible to increase the internal memory of the E500 device with a MicroSD card.
(Maximum 32GB MicroSD card).
• Switch off the phone and remove the rear cover and battery.
• Insert the memory card into the relevant slot.
• Then replace the battery and cover.
CAUTION: Inserting or removing a SIM card or a MicroSD card requires the Smartphone to be
completely switched off.
4. Installing and charging the battery
Installing the battery:
• Remove the rear cover of your Smartphone.
• Insert the battery ensuring that the image shown here is facing you.
• Replace the rear cover of the Smartphone.
CAUTION: Only use the battery supplied with your Smartphone.
Model: TG3660072ART 3.7V DC/2000 mAh Li-ion Battery
To replace the battery, please enquire with the after-sales service of your dealer.
Charging the battery:
• To charge the battery, connect the USB cable (supplied) to the USB port of your Smartphone and the
other end to the mains adaptor (supplied). Then connect the mains adaptor to a power outlet.
• The battery charge icon illuminates during charging and indicates the charge status.
• When the battery is fully charged, you can disconnect the USB cable from the device then from the
power outlet.
IMPORTANT:
• The Smartphone is only recharged via its USB port.
• Ensure your Smartphone is fully discharged before charging it for the first time.
• The battery must be charged for at least 5 to 8 hours when first charged.
Note: You can use the device when it is being charged. In this case, the battery may take longer to charge fully.