Instruction Manual

33
Annual function control of the safety valve
To test the safety valve, make sure that the red diode on the valve is on, indicating that the valve is
powered on and open.
Test the opening and closing of the valve by pressing the red test button on the SMB connection box.
The red diode on the valve should turn off and you should hear a clear clicking sound.
Annual function and installation check of the SMB and shut off valve
Checklist SMB and shut off valve YES NO
Is the SMB shut off valve installed on the downside from the emergency shut off valve?
Is the red diode on the shut off valve ON?
Does the red diode on the shut off valve turn on and off when the red test button is
pressed?
Does the valve make a clicking sound when the red test button is pressed?