User Manual

5
reset and repeat steps 1 & 2.
• A combined total of 9 pendants and Emer-
gency Wall Communicators can be learned
to a base unit. If a pendant has been lost or
replaced - erase all pendants and relearn all
current pendants and any Emergency Wall
Communicators.
At a later point in time, you might want to erase
your previously learned pendants. You can erase
all previously learned pendants by simply holding
down the red Code Learn button at the back of
the Base unit for 8-10 seconds. you will hear the
conrmation of “Previous Pendant Codes Erased”
from the Base unit. After that, you can program a
new pendant to the base unit following the steps
above as desired.
Battery Check / System Check:
The CaretakerSentry has a built-in battery tester
and method to check the whole system. You
should make yourself familiar with these tests
from the main CaretakerSentry users manual. If
you do not have these important safety instruc-
tions, please get them from our website or by
calling the company.