User Manual

4
heard from the pendant, STOP - wait 30
seconds and start at step #1 again.
3. When Pendant learning has been successful
you will hear “Pendant Code Learned” and
then it will announce the call setting that
the base is set to – Programming Mode or
Emergency Call Mode.
• If “Base and Pendant out of Range” is
heard from the Base or Pendant, STOP
- wait 30 seconds and start at step #1
again.
Notes:
• You have up to 45 seconds after pushing
the RED Code Learn button on the base
unit to get the pendant to enter “Pendant
Learning”.
• Teaching additional pendants does not
erase previously learned pendants.
• The base unit will automatically exit the
pendant learning mode after several sec-
onds or “Pendant Learning Failed”.
• If you hear the voice prompt “Base and
Pendant Out of Range” an error has
occurred, wait 30 seconds for the base to