User Manual

3
Installing the Battery
The Pendant requires one of the white Li-Ion
(Lithium Ion) batteries at any given time. The
pendant should be able to run up to 4 months on
a fully charged battery. Simpy slide the pendant
battery cover latch and install the Pendant bat-
tery following the direction diagram inside of
the battery compartment. You will hear a voice
conrmation of the battery status when properly
installed.
Teaching the Extra Pendant to the
CaretakerSentry System.
On the Base Unit:
1. Push and release the RED Code Learn
button on the back of the base unit. You will
hear a voice prompt “Pendant Learning”
On the Pendant:
2. PUSH the Blue Emergency button and
then IMMEDIATELY push the Gray Test
button –HOLD both buttons until you hear
“Pendant Learning” from the pendant -
then release both buttons on the pendant.
• If “Base and Pendant out of Range” is