User's Manual

Manufacturer’s Disclaimers and Limited Warranty
COMMUNICATION AND RESPONSE LIMITATIONS: Purchaser acknowledges
that signals which are transmitted over telephone lines, or other modes of
communication pass through communication networks wholly beyond the
control of the Manufacturer and are not maintained by the Manufacturer, and,
therefore, the Manufacturer shall not be responsible for any equipment or
communication failure which prevents transmission signals from reaching your
contact list including emergency 911 operators or damages arising therefrom.
Purchaser acknowledges that the Manufacturer provides no response to
the System’s equipment. The equipment is designed to communicate with
the a central station of your choice and the Manufacturer is not and shall not be
responsible for ambulance, police or other emergency response time or that any
response will be provided by the central monitoring station.
TESTING AND SERVICE OF THIS EQUIPMENT: The equipment, once installed,
are in the exclusive possession and control of the Purchaser, and it is Purchaser’s
sole responsibility to test the operation of equipment and request warranty
service if the equipment is under warranty.
PURCHASER’S EXCLUSIVE REMEDY: Purchaser’s exclusive remedy for the
Manufacturer’s default hereunder is to require the Manufacturer to repair or
replace, at the Manufacturer’s option, any equipment or part of the personal
emergency alert system which is non-operational during the Manufacturer’s
warranty period.
LIMITATION OF LIABILITY: This equipment is not designed or guaranteed
to prevent any loss or injury. This Limited Warranty and Disclaimer of Liability
constitutes the terms of sale and use of the equipment, and if there should arise
any liability on the part of the Manufacturer as a result of any cause whatsoever,
regardless of whether or not such loss, damage, or personal injury was caused
by or contributed to by the Manufacturer’s negligence to any degree or failure
to perform any obligation or strict products liability, such liability will be limited to
an amount paid by the Purchaser to the Manufacturer for the product, or to the
sum of $350.00, whichever is greater.
For warranty information, see your dealer for details.
BLACK Emergency Button
2 Second Push
Alert Watch in
Pendant Bezel
v7.4
Base Unit - Model 40914
FCC ID: TYD-CS40914
IC: 8471A-CS40914
Watch Pendant - Model 40917
FCC ID: TYD-CS40917
IC: 8471A-CS40917
REN 3.7
Alert Watch in
Watch Bezel
Telephone
Jacks
Line IN To House
Phone
Programming Switch
Programming Mode “Emergency Call Mode”
Normal Operation
Reset
(Black)
Power DC 7.5
800 mAh
Code Learn
(Red)
Base Back View
Base Top View
Red Emergency
button
(Blue)
(Green)
(Red)
Blue CareTaker
button
Microphone
(Yellow)
Speaker
Cancel (1 second)
System Check (8
seconds)
Cellular Accessory Jack
Base Side View
CaretakerSentry
Part #40914
Features and Details
Alert Watch
Part #40917
Features and Details
Alert Watch
Instructions for Adding
an Alert Watch to Your
CaretakerSentry

Summary of content (3 pages)