User's Manual

LifeSentry

v0.3

Connecting the Base Unit

Power Connection. Simply plug in the AC Adapter in to the nearest elec-

trical outlet. Plug the other end of the AC power adapter into the Base unit.

You need to push the plug into the opening in the Base unit and twist 90’

clockwise to lock in place. To remove in the future, simply rotate 90’ coun-

ter-clockwise and pull outward.

Caution: Do not plug the AC Adapter into an outlet which is controlled

by a switch. The switch could accidentally be turned off, thus rendering

the Base unit inoperable after approximately 24 hour when the back up

batteries become discharged.

Telephone Connection. A standard telephone line is required to use your

system. Your phone will work with your existing touch-tone phone line and

existing service. It works the same way as any cordless phone. NOTE:

Touch Tone service is required.

Simply plug one end of the telephone cord into your telephone jack in the

wall, and the other end into the “Line In” at the back of the Base unit. Note

- you will feel a ‘click’ when the cords are rmly seated in the wall and the

Base unit jack receptacles.

If you need to plug a conventional telephone into same outlet used by the Base

unit, simply plug the telephone into the spare jack labeled “To House Phone”

How to Handle VoIP, DSL and other Internet phones: It is NOT recom-

mended to operate this product over VoIP internet phone systems such as