User's Manual

LifeSentry

v0.3

System Check:

The button on the back of the Pendant case which is used to perform the

BATTERY CHECK, will also perform a SYSTEM CHECK. Press and hold

this button for more than four (4) seconds. One of the following announce-

ments will be made.

“All systems are ok.”

This conrms the following:

Battery status.

The Pendant is working.

The Base unit is working.

The Base unit is connected to a working phone line.

The Pendant is within range of the Base unit.

“System cannot detect dial tone.”

The Base unit is not connected to the phone line or can not get a

dial tone for some reason.

“Base and Pendant out of range.”

This conrms one or more of the following:

The Pendant has malfunctioned.

The Base has malfunctioned.

The Pendant and Base unit are not communicating with each other

or are out or range.

If you receive a failure notication, please refer to the TROUBLESHOOT-

ING guide on page 16 of this manual to determine the cause.

This testing feature is very useful - allowing you to conrm that the

System has coverage from all parts of your home. Simply walk to the

various parts of your home and push the Battery Check / System Check

button until you hear the few beeps. You can then release the button,

and you will hear the dial tone and then the “All Functions are OK”

voice prompt, “Pendant and Base out of Range”, or “System cannot

detect dial tone”