User's Manual
6
Emergency Wall Communicator
v0.2
“System cannot detect dial tone.”
The Base unit is not connected to the phone line or can not get a
dial tone for some reason.
“Base and Pendant out of range.”
This conrms one or more of the following:
The EWC has malfunctioned.
The Base has malfunctioned.
The EWC and Base unit are not communicating with each other
or are out or range.
Caution - To ensure proper operation, this equipment must be installed
according to the these instructions. We highly recommend that you
perform this System Check after installation and at least monthly to
conrm that your system is working properly It is also recommended
to perform this system check after a lightning storm that could damage
the Base unit which is plugged into the phone line.
Water Resistance:
This EWC is designed to be mounted on a bathroom wall if desired.
However, it should never be submerged or exposed to water continuously.
If your EWC is not working, call our tech support at 703-934-7934 .
Information The FCC Wants You To Know:
FCC ID:TYD37920
Canada IC:8471A-37920
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Privacy of communications may not be ensured when using this device!