User's Manual

v9.5 FreedomAlert
®
13
1. Completely fill out this worksheet before starting to program telephone
numbers.
2. Call a friend or family member on your telephone.
3. Slide switch to LEARN MODE [voice prompt – Learn Mode]
4. Enter: 1234 [voice prompt – one, two, three, four, programming mode]
5. (Enter “#” then the 1st phone number) :
# __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
[voice prompt – numbers as you enter them]
Skip to step 9 to Exit Programming, or
6. (Enter “#” then the 2nd phone number)
# __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
[voice prompt – numbers as you enter them]
Skip to step 9 to Exit Programming, or
7. (Enter “#” then the 3rd phone number) :
# __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
[voice prompt – numbers as you enter them]
Skip to step 9 to Exit Programming, or
8. (Enter “#” then the 4th phone number) :
# __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
[voice prompt – numbers as you enter them]
9. Enter: #### [voice prompt – end of programming]
10. Slide switch back to Friends & 911, Friends Only or 911 Only
11. Programming complete!
FreedomAlert instructions v9-5 E13 13 10/24/2009 11:02:00 PM