Operations Guide

Intelligent Electronic swing handle – User operations guide
10
3. Put the metal back cover on the inside of the handle and insert the 3 screws to secure the handle in place,
alternate between the screws while tightening to prevent skewing of the handle.
4.
Place the door cam over the handle spindle and then a thick or thin door limiter using the spring screw to
secure the mechanism. (For retrofit, re-use the front and rear door cam). Check the cam closes snuggly
when the handle is rotated. Swap the door limiters or slightly bend the cam if the cam hits the rack frame
.
5. Repeat the procedure for the second door.