Product Info

Report No: CCISE191202301-V01
Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912023
No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road,
Bao’an District, Shenzhen, Guangdong, China
Telephone: [phone] Fax: [phone], E-mail: [e-mail] Page 48 of 171
13.5 Bluetooth Conducted Power
Average Power (dBm) (Bluetooth)
Channel
Frequency (MHz)
GFSK
π/4-DQPSK
8DPSK
CH 01
2402
5.89
5.73
5.70
CH 39
2441
3.61
4.02
4.05
CH 78
2480
1.55
2.00
2.09
Average Power (dBm)
Channel
Frequency (MHz)
BLE
CH 00
2402
-1.48
CH 20
2442
-3.08
CH 39
2480
-4.39
Note:
1. Per KDB 447498 D01v06, the 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤
50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-
g SAR, where
 f(GHz) is the RF channel transmit frequency in GHz
 Power and distance are rounded to the nearest mW and mm before calculation
 The result is rounded to one decimal place for comparison
Channel
Frequency
(GHz)
Max. tune-up
Power (dBm)
Max. Power
(mW)
Test distance
(mm)
Result
exclusion
thresholds
for 1-g
SAR
CH 01
2.402
6
3.98
5
1.23
3.0
2. The max. tune-up power was provided by manufacturer, base on the result of note 1, RF exposure evaluation is not
required.
3. The output power of all data rate were pre-scan, just the worst case of all mode were shown in report.
4. When the minimum test separation distance is < 5 mm, a distance of 5 mm according is applied to determine SAR test
exclusion.