Product Info

Report No: CCISE191202301-V01
Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1912023
No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road,
Bao’an District, Shenzhen, Guangdong, China
Telephone: [phone] Fax: [phone], E-mail: [e-mail] Page 24 of 171
11 EUT Testing Position
This EUT was tested in ten different positions. They are right cheek/right tilted/left cheek/left tilted for head,
Front/Back/Right Side/Top Side/Bottom Side of the EUT with phantom 10 mm gap, as illustrated below, please
refer to Appendix B for the test setup photos.
11.1 Handset Reference Points
 The vertical centreline passes through two points on the front side of the handset – the midpoint of the
width w
t
of the handset at the level of the acoustic output, and the midpoint of the width w
b
of the bottom of
the handset.
 The horizontal line is perpendicular to the vertical centreline and passes the center of the acoustic output.
The horizontal line is also tangential to the handset at point A.
 The two lines intersect at point A. Note that for many handsets, point A coincides with the center of the
acoustic output; however, the acoustic output may be located elsewhere on the horizontal line. Also note
that the vertical centreline is not necessarily parallel to the front face of the handset, especially for
clamshell handsets, handsets with flip covers, and other irregularly shaped handsets.
Fig.11.1 Illustration for Front, Back and Side of SAM Phantom
Fig. 11.2 Illustration for Handset Vertical and Horizontal Reference Lines