Moblie Appearance pictue 1
Table of Contents Moblie Appearance picture ................... 1 Table of Contents .................................. 2 Foreword ............................................... 3 Getting to know your touch phone ...... 7 Phone ID map introduction................... 9 Starting up the device ......................... 10 Introduce the basic phone function ... 15 Technical Specifications ..................... 22 SAR......................................................
Foreword Safety In order to ensure the phone is used safely and correctly, please read the precautions below carefully before use. 1.1 General precaution ·Your phone is only suitable for the battery and charger approved by our company or else it may cause the battery to leak, overheat, explode or even catch fire. ·Do not knock, vibrate or throw the phone heavily to avoid malfunction, fire, overheating, explosion or fire.
1.2 Precaution for the use of charger ·Do not cause short circuit to the charger, or it may cause electric shock, fumes and damage to the charger. ·Do not use the charger if the power wire is broken, or it may cause fire and electric shock. ·Please remove accumulated dust on the power plug. ·Do not put water containers next to the power supply to avoid overheating, fire, electric shock and malfunction in case they come into contact.
down, and even make recharging unavailable. So, please clean them periodically. 1.4 Common Precaution Mobile Phone: ·Please use the phone in an environment with temperature between -20℃- 45℃and humidity of <75%. ·Please use the phone far away from regular telephones, TV sets, radio sets and office automation equipment, to avoid affecting the normal use of these equipments and mobile phone. Battery: ·Store the battery in cool and ventilated place without direct sunlight. ·The battery has a limited lifespan.
swelled batteries, and there is a risk of battery explosion. - Places near the TV (may affect images and sounds), such as TVs, radios, etc.
Getting to know your touch phone 7
Phone ID map introduction Front camera:A camera placed on the front of the phone that can be used for mirroring photos. Receiver:It used to answer the call. Flash:Mirroring in the low light, you can add light to the subject. Display screen:It can display relevant content about the phone. Microphone:It is used to transmit sound when making a call. Battery cover open position:Use this position as the cut-in port, open the back cover of the phone to install or unload the battery.
Starting up the device To install the SIM card ·Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out of the card slot as shown in the diagram. ·Slide the SIM card completely into the slot. To install a memory card To have additional storage for your images, videos, music and files, you can purchase a memory card and install it in your device. Locate the memory card slot on the upper part of the exposed left panel.
Charging the Battery The new battery is partially charged. It is recommended that you install and charge the battery before you start using it. Some batteries perform best after several full charge/discharge cycles. Use only the AC adapter and USB sync cable supplied with your device to charge your device. Connect the AC adapter's USB connector to the sync connector on your device, then plug the AC adapter into a power outlet to begin charging the battery.
charger from the AC power socket, do not connect the power for a long time. 2. When charging the battery, do not remove the battery from the device. Power on/off To turn off the phone, first light up the screen, then long press the power button as shown below to open the mode option menu, select Shut down. To turn on your phone, press and hold the power button again.
lock/unlock screen Open the Security & Location Information option under Phone Settings and select the screen lock method. There are five types as shown below: None, Slide, Pattern, PIN and Password. You can choose the way you like to unlock. (The example below shows the pattern unlock) 1.Lock screen You can lock the screen by clicking the power button to turn off the screen. 2.Unlock screen None Light up the screen again to unlock.
You can also use Fingerprint to unlock the screen 14
Introduce the basic phone function 1. Switch MainMenu style (1) In default Home screen, slide your fingertip left and right along the screen to reveal the more home screen. (2) On Home screen, Swipe up on the arrow to enter the main menu screen, slide your fingertip up and down along the screen to reveal the more applications.
2. Home screen (1) Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting the icon of ‘Clear’ at the bottom of the notifications window.
(3) Move objects on the Home screen ·To move an icon or other item on the Home screen, you must first touch & hold it to enter move mode. The object will magnify when it’s ready to be moved. ·Without lifting your finger (or you’ll drop out of move mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift; position the object and release. 3.
4. GPRS/WLAN network Your device’s networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS. You can also add and set up a VPN or proxy connection. To use WLAN on your device, you need access to a wireless access point Note: The availability and range of your device’s WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. To open the Browser you need to be connected to a network.
5. U-disk storage This phone supports removable storage, which is a USB flash drive. When you turn on your phone, when you connect to your PC via the data cable, you will see the battery icon charging while in the status bar at the top of the screen. Touch the screen to scroll down the arrow to open the list of notifications that appear in the sliding window. You can use your phone as a USB flash drive by selecting [Charge this device] to [Transfer File].
6. Music Your music is organized into four categories: Artists, Albums, Songs and Genres. Select a category to view the lists within each. Once in a category, keep selecting until you reach the music you want to play.
7. Bluetooth The phone supports Bluetooth(BT) functions, you can establish a wireless connection between the phone with other compatible devices, and data transmission, you can establish a wireless connection between devices in the phone with a distance of up to 10 meters. Bluetooth connection may be interference by obstacles, such as walls or other electronic device. 1. Enter the setting menu, Touch the Bluetooth to open the function, idle screen will display BT icon in the status bar. 2.
Technical Specifications Technical Specifications Weight: 180g (Including battery) Dimensions: 156.1*75.4*9.85 mm Band: GSM850/900/1800/1900MHz WCDMA 850/1700/1900/2100MHz 4G B2/4/7/28A&B Battery Type: Li-ion Battery Voltage：4.35V Battery Capacity: 2350mAH Talk Time: 19hours(GSM) 9.5hours(WCDMA) Standby Time: about 280h Battery Time (No prior or separate notice is required for capacity changes) Note: Actual operating conditions depend on the local network environment, SIM, and user behavior.
SAR Specific Absorption Rate (SAR) Certification THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines.
power output of the device, the lower its SAR value. A body-worn SAR test has been performed on this device at a separation distance of 5 mm. To meet RF exposure guidelines during body-worn operation, the device must be positioned at least 5 mm away from the body.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, interference that including may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.294W/Kg and when worn on the body, as described in this user guide, is 0.793W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is1.501W/Kg.While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.
http://www.fcc.gov/ oet/fccid after searching on FCC ID: 055573420 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
