Installation Guide

10
11
1. Antenna
2. Radiation shield &
hygro-thermo sensor
3. Mounting base
4. Battery door
5. RESET button
6. Transmission status LED
7. Bubble level
8. Rain collector
9. Wind vane
10. UV/light sensor
11. Solar Cell
12. Wind cups
WIRELESS SENSOR OVERVIEW
WIRELESS HYGRO-THERMO SENSOR OVERVIEW
6
3. GETTING STARTED
3.1 WIRELESS 7-IN-1 SENSOR
1. Antenna 7. Bubble level gradienter
2. Radiation shield & Thermo-hygro sensor 8. Rain collector
3. Mounting parts (t for 35 ~40mm diameter pole) 9. Wind vane
4. Battery door 10. UV / light sensor
5. [ RESET ] key 11. Solar panel
6. Transmission status LED 12. Wind cups
6
3. GETTING STARTED
3.1 WIRELESS 7-IN-1 SENSOR
1. Antenna 7. Bubble level gradienter
2. Radiation shield & Thermo-hygro sensor 8. Rain collector
3. Mounting parts (t for 35 ~40mm diameter pole) 9. Wind vane
4. Battery door 10. UV / light sensor
5. [ RESET ] key 11. Solar panel
6. Transmission status LED 12. Wind cups
INSTALLATION INSTRUCTIONS
SETTING UP THE WIRELESS 7-IN-1 OUTDOOR SENSOR
The wireless 7-in-1 outdoor sensor measures wind speed, wind direction, rainfall, UV, light intensity,
temperature, and humidity.
1
7
9
10
11
12
8
3
4
2
5
6
1. Transmission status LED
2. Wall mounting holder
3. Channel switch
4. RESET button
5. Battery Compartment
2
1. [ SNOOZE ] key
2. [ HISTORY ] key
3. [ MAX / MIN ] key
4. [ CHANNEL ] key
5. [ BARO ] key
6. [ WIND ] key
7. [ SUNT ] key
8. [ RAIN ] key
9. LCD display
10. [ WI-FI / SENSOR ] key
11. [ REFRESH ] key
12. Wall mounting holder
13. [ CLOCK SET ] key
14. [ V / INDEX ] key
15. [ Ʌ ] key
16. [ OFF / LO / HI ] key
17. Table stand
18. [ ALARMT ] key
19. [ ALERT ] key
20. Power jack
21. Battery compartment
22. [ °C / °F ] key
23. [ RESET ] slide switch
LCD DISPLAY
12 3
4
6
5
7
8
9
Display section:
1. Outdoor temperature & humidity
2. Wind direction & speed
3. Indoor (Ch) temperature & humidity
4. Weather index
5. UV index & light intensity (SUN)
6. Weather forecast
7. Barometer
8. Rain
9. Time & Data, moon phase, Sunrise/Sunset
time
WIRELESS INDOOR HYGRO-THERMO SENSOR
1
2
3
4
5
1. Transmission status LED
2. Wall mounting holder
3. Channel slide switch
4. [ RESET ] key
5. Battery compartment
1
2
3
4
5
915