Installation Guide

42
43
Once your device is connected, login into your Weather Underground account and see your device's live
weather data on the dashboard.
Once your device is connected, login into your Weather Cloud account and see your device's live
weather data on the dashboard.
1. To view the live data, visit https://weathercloud.net and sign into your account.
2. Click the view icon in the setting drop-down menu of your station.
3. Click “Current”, “Wind”, “Evolution”, or “inside” icon to view the live data of your weather station.
VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND (WU)
VIEW YOUR WEATHER DATA IN WEATHERCLOUD (WC)
Follow the steps below to update your device’s Function or Wi-Fi
®
System Firmware
1. Download the latest version of the rmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer to Setting
Up Wi-Fi
®
Connection).
3. Click the button in rmware update section and browse the location of the rmware
le you downloaded in step 1. To update the Wi- rmware, click the “Browse” button in the Wi-
rmware section.
4. Press to start rmware update.
5. The console will restart once the update is completed.
NOTES: You cannot update the Function Firmware and Wi-Fi
®
Firmware at the same time. Updates
must be installed one by one.
Make sure the power cable remains connected during the update process.
Make sure your PC’s wireless connection is stable.
Once the update process starts, do not try to do anything else on your PC or on the display console.
A USB ash drive is required for the system update.
1. Download the latest version of the rmware to your PC/Mac.
2. Unzip and copy the .upg le to the root directory of the ash drive.
3. Plug the ash drive to the USB port.
4. Press the left key to select “Yes”.
5. Press the conrm key to conrm and start the system rmware update.
6. Once the update is completed, press the conrm key to exit rmware update mode.
29
8.1.1 FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to section 6.1 and 6.2).
3. From the SETUP page, press ADVANCED to enter advance setting
4. Under the rmware upload section, press
Browse
to locate the rmware le saved on
your PC/Mac.
5. Press
Upload
to start rmware update.
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current
setting. Simply press and hold [ SENSOR / WI-FI ] key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC/Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC/Mac and console until the update nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the rmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
- After the rmware update, If the setup informations are missing, please input the setup information again.
- Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2 BATTERY REPLACEMENT
When low battery indicator “
” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press [ SENSOR / WI-FI ] key on the console to enter sensor synchronization mode (as
indicated by the ashing antenna ).
8.3 RESET AND FACTORY RESET
To reset the console and start again, press the [ RESET ] key once or remove the backup battery
and then unplug the adapter.
To resume factory settings and remove all data, press and hold the [ RESET ] key for 6 seconds.
29
8.1.1 FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to section 6.1 and 6.2).
3. From the SETUP page, press ADVANCED to enter advance setting
4. Under the rmware upload section, press
Browse
to locate the rmware le saved on
your PC/Mac.
5. Press
Upload
to start rmware update.
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current
setting. Simply press and hold [ SENSOR / WI-FI ] key for 6 seconds to exit AP mode.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC/Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC/Mac and console until the update nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect to your WI-FI
router and upload the data again once the rmware update succeed. If the console cannot connect to your
router, please enter the SETUP page to setup again.
- After the rmware update, If the setup informations are missing, please input the setup information again.
- Firmware update process have potential risk, which cannot guarantee 100% success. If the update fail,
please redo the above step to update again.
8.2 BATTERY REPLACEMENT
When low battery indicator “
” is displayed near the antenna icon
of the sensor(s), it indicates that the outdoor 7-IN-1 sensor and/or
current channel sensor(s) battery power is low respectively. Please
replace with new batteries.
8.2.1 RE-PAIRING THE SENSOR(S) MANUALLY
Whenever you changed the batteries of the 7-in-1 weather sensor array or other additional
sensors, re-synchronization must be done manually.
1. Change all the batteries to new ones in the low battery sensor(s).
2. Press [ SENSOR / WI-FI ] key on the console to enter sensor synchronization mode (as
indicated by the ashing antenna ).
8.3 RESET AND FACTORY RESET
To reset the console and start again, press the [ RESET ] key once or remove the backup battery
and then unplug the adapter.
To resume factory settings and remove all data, press and hold the [ RESET ] key for 6 seconds.
UPDATE THE WI-FI FIRMWARE
UPDATE THE SYSTEM FIRMWARE
The console rmware update consists of two parts: Wi- function rmware and System rmware.
UPDATING THE FIRMWARE
41
8.2 VIEW YOUR WEATHER DATA IN WUNDERGROUND
To view your weather station live data in a web browser (PC or mobile version), please visit http://www.
wunderground.com, and then enter your “Station ID” in the searching box. Your weather data will show up
on the next page. You can also login your account to view and download the recorded data of your weather
station.
Another way to view your station is use the web browser URL bar, type below in the URL bar:
https://www.wunderground.com/dashboard/pws/XXXX
Then replace the XXXX by your Weather underground station ID to view your station live data.
You can also check Weather Underground web site to learn more about their mobile App for Android and
iOS.
8.3 VIEWING YOUR WEATHER DATA IN WEATHERCLOUD
1. To view your weather station live data in a web browser (PC or mobile version), please visit https://
weathercloud.net and sign in your own account.
2. Click the
icon inside the pull down menu of your station.
3. Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather station.
9. FIRMWARE UPDATE
The console rmware update consists of two parts, which is WI-FI function rmware and System rmware.
Please refer to below rmware update steps.
9.1 UPDATE THE WI-FI FIRMWARE
The display console supports OTA rmware update capability. Its rmware can be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity. Update
function, however, is not available through mobile/smart devices.
Firmware version: 1.00
Browse
Upload
Current WiFi
rmware version
Bottom of web interface ADVANCED page
Press to start upload the
rmware to console
Select the rmware le for
update
41
8.2 VIEW YOUR WEATHER DATA IN WUNDERGROUND
To view your weather station live data in a web browser (PC or mobile version), please visit http://www.
wunderground.com, and then enter your “Station ID” in the searching box. Your weather data will show up
on the next page. You can also login your account to view and download the recorded data of your weather
station.
Another way to view your station is use the web browser URL bar, type below in the URL bar:
https://www.wunderground.com/dashboard/pws/XXXX
Then replace the XXXX by your Weather underground station ID to view your station live data.
You can also check Weather Underground web site to learn more about their mobile App for Android and
iOS.
8.3 VIEWING YOUR WEATHER DATA IN WEATHERCLOUD
1. To view your weather station live data in a web browser (PC or mobile version), please visit https://
weathercloud.net and sign in your own account.
2. Click the
icon inside the pull down menu of your station.
3. Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather station.
9. FIRMWARE UPDATE
The console rmware update consists of two parts, which is WI-FI function rmware and System rmware.
Please refer to below rmware update steps.
9.1 UPDATE THE WI-FI FIRMWARE
The display console supports OTA rmware update capability. Its rmware can be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity. Update
function, however, is not available through mobile/smart devices.
Firmware version: 1.00
Browse
Upload
Current WiFi
rmware version
Bottom of web interface ADVANCED page
Press to start upload the
rmware to console
Select the rmware le for
update
41
8.2 VIEW YOUR WEATHER DATA IN WUNDERGROUND
To view your weather station live data in a web browser (PC or mobile version), please visit http://www.
wunderground.com, and then enter your “Station ID” in the searching box. Your weather data will show up
on the next page. You can also login your account to view and download the recorded data of your weather
station.
Another way to view your station is use the web browser URL bar, type below in the URL bar:
https://www.wunderground.com/dashboard/pws/XXXX
Then replace the XXXX by your Weather underground station ID to view your station live data.
You can also check Weather Underground web site to learn more about their mobile App for Android and
iOS.
8.3 VIEWING YOUR WEATHER DATA IN WEATHERCLOUD
1. To view your weather station live data in a web browser (PC or mobile version), please visit https://
weathercloud.net and sign in your own account.
2. Click the
icon inside the pull down menu of your station.
3. Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather station.
9. FIRMWARE UPDATE
The console rmware update consists of two parts, which is WI-FI function rmware and System rmware.
Please refer to below rmware update steps.
9.1 UPDATE THE WI-FI FIRMWARE
The display console supports OTA rmware update capability. Its rmware can be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity. Update
function, however, is not available through mobile/smart devices.
Firmware version: 1.00
Browse
Upload
Current WiFi
rmware version
Bottom of web interface ADVANCED page
Press to start upload the
rmware to console
Select the rmware le for
update
41
8.2 VIEW YOUR WEATHER DATA IN WUNDERGROUND
To view your weather station live data in a web browser (PC or mobile version), please visit http://www.
wunderground.com, and then enter your “Station ID” in the searching box. Your weather data will show up
on the next page. You can also login your account to view and download the recorded data of your weather
station.
Another way to view your station is use the web browser URL bar, type below in the URL bar:
https://www.wunderground.com/dashboard/pws/XXXX
Then replace the XXXX by your Weather underground station ID to view your station live data.
You can also check Weather Underground web site to learn more about their mobile App for Android and
iOS.
8.3 VIEWING YOUR WEATHER DATA IN WEATHERCLOUD
1. To view your weather station live data in a web browser (PC or mobile version), please visit https://
weathercloud.net and sign in your own account.
2. Click the
icon inside the pull down menu of your station.
3. Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather station.
9. FIRMWARE UPDATE
The console rmware update consists of two parts, which is WI-FI function rmware and System rmware.
Please refer to below rmware update steps.
9.1 UPDATE THE WI-FI FIRMWARE
The display console supports OTA rmware update capability. Its rmware can be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity. Update
function, however, is not available through mobile/smart devices.
Firmware version: 1.00
Browse
Upload
Current WiFi
rmware version
Bottom of web interface ADVANCED page
Press to start upload the
rmware to console
Select the rmware le for
update