Installation Guide

38
39
2. Sign into Weathercloud and then go to the “Devices” page. After, click “+ New” to add new device.
3. Enter all the information in the “Create new device” page. Once you ll in all the information, click
“Create”.
SETTING UP WI-FI
®
CONNECTION
When you rst power up the console, the console LCD display will show the “AP” ashing and the
icon to signify that it has entered Access Point (AP) mode.
1. To activate AP mode, press the SETTING button to open the setting menu.
2. Press the up or down key to enter the other setting section.
3. Press the right key to enter sub menu.
4. Press the up or down key to select Enable Access Point, then press the conrm key to start
the AP mode.
Use your smartphone, tablet, or computer to connect to the console via Wi-Fi
®
by following these steps:
1. On PC, open your Wi-Fi
®
network settings. On Android
™
or iOS devices, go to settings menu and
then select Connections/WI-FI to open the network settings.
2. Locate the display console’s SSID from the list. It should appear as PWS-XXXXXX (where all the X’s
are integers) in the list. Tap on the SSID to connect. This step will take several seconds.
3. Once you are connected to the display console, open your internet or mobile web browser, and enter
the following address into the address bar: http://192.168.1.1 (make sure to include the http:// or
else the web browser may interpret the address as a search query). We recommend using the latest
version of reputable web browsers.
5. Select the Weather underground in rst or second row of the Weather server setup section then enter
in your Station ID and key that was assigned by Weather underground.
4. Memorize your Station ID and key for future setup.
CREATE YOUR WEATHERCLOUD ACCOUNT
1. Visit the Weather Underground website at https://www.wunderground.com and click the “Join” on
the top right corner to open the registration page. Follow the instructions to create an account.
NOTE: Please use a valid email address to register your account.
36
6. Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device",
(1) enter a Name for your weather station. (2) ll in the other information (3) select "I Accept" to accept
Weather underground's privacy terms, (4) click “Next” to create your station ID and key.
(2)
(2)
(3)
(4)
(1)
7. Jot down Your "Station ID" and "Station key" for the further setup step.
8. In the setup UI that mention in section 5.2, select the Weather underground in rst or second row of the
Weather server setup section then key-in the Station ID and key that assigned by Weather underground.
6.3 FOR WEATHERCLOUD (WC)
1. In https://weathercloud.net enter your information in "Join us today" section, then follow the
instructions to create your account.
37
2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device.
3. Enter all the information in Create new device page, for the Model* selection box select the "W100
Series" under "CCL" section. For the Link type* selection box select the "SETTINGS", Once you have
completed, click Create.
4. Jot down your ID and key for the further setup step.
5. In the setup UI that mention in section 5.2, select the weathercloud in rst or second row of the Weather
server setup section then key-in the Station ID and key that assigned by weathercloud.
37
2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device.
3. Enter all the information in Create new device page, for the Model* selection box select the "W100
Series" under "CCL" section. For the Link type* selection box select the "SETTINGS", Once you have
completed, click Create.
4. Jot down your ID and key for the further setup step.
5. In the setup UI that mention in section 5.2, select the weathercloud in rst or second row of the Weather
server setup section then key-in the Station ID and key that assigned by weathercloud.
37
2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device.
3. Enter all the information in Create new device page, for the Model* selection box select the "W100
Series" under "CCL" section. For the Link type* selection box select the "SETTINGS", Once you have
completed, click Create.
4. Jot down your ID and key for the further setup step.
5. In the setup UI that mention in section 5.2, select the weathercloud in rst or second row of the Weather
server setup section then key-in the Station ID and key that assigned by weathercloud.
38
7. CONNECT DISPLAY CONSOLE TO WI-FI
7.1 CONSOLE IN ACCESS POINT MODE
When you power up the console for the rst time, the console LCD will show ashing "AP"
and "
" icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI
settings. User can also manually set the console into AP mode.
1. To activate AP mode, press key to enter the
MENU SETTING SCREEN. (SECTION 4.9.8)
2. Press / key to enter OTHER SETTING
SECTION
3. Press key to enter the sub menu
4. Press / key to select ENABLE ACCESS
POINT (AP mode), then press key to start the
AP mode
7.2 CONNECT TO THE CONSOLE
1. Use PC/Mac, smart phone or tablet to connect with the console through WI-FI network setting.
2. In PC/Mac WI-FI network settings, or In Android / iOS smart phones setting connect WI-FI to the
console’s PWS WI-FI network as shown in gures below (console WI-FI network name will always
begin with PWS -) :
PWS-000710
PWS-000710
E.g. PC WI-FI network interface E.g. Android smart phone WI-FI network interface
3. Once connected, enter the following IP address into your Internet browser’s address bar, to access the
console’s SETUP web interface:
http://192.168.1.1
NOTE :
- Some browsers will treat 192.168.1.1 as a search, so make sure you include header http://.
- If you cannot enter the console 's web interface, please turn o󰀨 the mobile data / network in you smart
phone and try again.
- Recommended browsers include the latest version of Chrome, Safari, Edge, Firefox or Opera.
- WI-FI network interface of PC/Mac or smart phone may subject to change.