Installation Guide

30
31
SET CHANNEL ALERT
OTHER ALERT FUNCTIONS
Calibration for Indoor Parameter
Calibration for Outdoor Parameter
Checking Sensor Status
1. Press the up or down key to select the connected sensor.
2. Press the right key twice to select the sensor type icon.
3. Press the right key again to show the sensor connection status.
1. Press the right key to enter the indoor alert setting screen
2. Press / key to adjust the value or the on and o option.
3. Press the left or right key to select dierent setting value.
4. Press the up or down key to select dierent row of the setting.
5. When nished, press the left key to go back to alert screen or the HOME button to go back to
the home screen.
1. Press the right key to enter the outdoor alert setting screen
2. Press / key to adjust the value or the on and o option.
3. Press the left or right key to select dierent setting value.
4. Press the up or down key to select dierent row of the setting.
5. When nished, press the left key to go back to alert screen or the HOME button to go back to
the home screen.
1. Press the right key to enter the channel alert setting screen
2. Press / key to adjust the value or the on and o option.
3. Press the left or right key to select dierent setting value.
4. Press the up or down key to select dierent row of the setting.
5. When nished, press the left key to go back to alert screen or the HOME button to go back to the
home screen.
1. Press the right key to enter indoor calibration screen.
2. Press / key to adjust the value.
3. Press the left or right key to select dierent parameter.
4. Press the up or down key to select dierent row of the parameter.
5. When nished, press the right key to go back to the calibration screen or press the HOME
button to go to the home screen.
1. Press the right key to enter outdoor calibration screen.
2. Press / key to adjust the value.
3. Press the left or right key to select dierent parameter.
4. Press the up or down key to select dierent row of the parameter.
5. When nished, press the right key to go back to the calibration screen or press the HOME
button to go to the home screen.
ALERT SETTING
SET INDOOR ALERT
CALIBRATION SETTING
SET OUTDOOR ALERT
28
4.9.5.3 CHECK SENSOR STATUS
1. In this section, press / key to select the connected sensor.
2. Press key twice to select the sensor type icon
3. Press the key again to show the sensor connection status as below:
4.9.6 ALERT SETTING
In this section, press / key to select indoor, outdoor sensor, channels or other settings.
4.9.6.1 SET INDOOR ALERT
1. In the indoor row, press key to enter indoor
alert setting screen.
2. Press / to adjust the value or on / o󰀨 alert.
3. Press / to select di󰀨erent setting value.
4. Press / to select di󰀨erent row of the setting.
5. Once nished, Press until back to the alert
screen or press [ home ] key for back to normal
screen.
Sub item Operation / Description
Reset all alert values
1.
Press key to show the confirmation screen
2. Press / key to select Yes or No
3.
Press key to confirm the action
Disable all alerts
1.
Press key to show the confirmation screen
2. Press / key to select Yes or No
3.
Press key to confirm the action
Alert Activated Press key to show the list of the activated alerts
Press the up /down key to select indoor, outdoor, channels, or other settings.