Installation Guide
28
29
DISPLAY SETTING
UNIT SETTING
Press the up /down key to select one of the following settings:
SENSOR STATUS & EDITING
Adding a New Sensor
Deleting a Current Sensor
26
4.9.2 ALARM TIME SETTING
a
b
c
d
e
f
In this section, press / key to select the sub items.
# Sub item Operation
a Alarm time set
Press / to select between hour or minute, press / to adjust the
value.
b Alarm mode
Press / to select Everyday or Weekday only
c Alarm
Press / to turn on or turn o.
d Ice pre alert
Press / to turn on or turn o.
e Alarm sound level
Press / to adjust the sound level
f Key tone level
Press / to adjust the key tone level (default is o)
4.9.3 DISPLAY SETTING
a
b
c
d
e
f
g
h
i
In this section, press / key to select the sub items.
# Sub item Operation
a Language
Press / to select the display language
b Background color
Press / to select light or dark color background for display mode
c Night mode
Press / to set enable (trigger to the activate time period), disable or
auto (trigger by your room ambient light level)
d Night mode activate
time
Press / to select between hour or minute press / to adjust the
value.
e MAX / MIN record
mode
Press / to select MAX / MIN data records mode by Accumulate (Acc.)
or daily.
f Back light level
Press / to adjust the back light level in normal
g Back light level
(Night mode)
Press / to adjust the back light level during night mode
h Contrast
Press / to adjust the screen contrast
i Brightness
Press / to adjust the screen brightness
Press the up /down key to select one of the following settings:
#
Sub item
Operation
a
Language
Press
/ to select the display language
b
Background color
Press
/ to select light or dark color background for display mode
c
Night mode
Press
/ to set enable (trigger to the activate time period), disable or auto
(trigger by your room ambient light level)
d
Night mode activate time
Press
/ to select between hour or minute. Press / to adjust the value.
e MAX / MIN record mode Press
/ to select MAX / MIN data records mode by Accumulate (Acc.) or daily.
f
Back light level
Press
/ to adjust the back light level in normal
g
Back light level
(Night mode)
Press
/ to adjust the back light level during night mode
h
Contrast
Press
/ to adjust the screen contrast
i
Brightness
Press
/ to adjust the screen brightness
27
4.9.4 UNIT SETTING
a
b
c
d
e
f
g
h
Sensor name column,
In this section, press / key to select the sub items.
# Sub item Operation
a Temperature
Press / to select ˚C or ˚F
b Baro pressure
Press / to select hPa, inHg or mmHg
c Baro type
Press / to select Relative or Absolute
d Rain
Press / to select mm or in
e Wind speed
Press / to select m/s, km/h, knots or mph
f Wind direction
Press / to select 16 direction or 360˚
g Light
Press / to select Klux, Kfc or W/m²
h Skin type
Press / to select Light, Medium or Dark skin type for exposure level
4.9.5 SENSOR STATUS & EDITING
Edit sensor column
Channel number
column
Sensor type column
Sensor ID column
Sensor name column,
you can name your
sensor in setup UI
4.9.5.1 ADD NEW SENSOR
1. In this section, press / key to select the empty channel.
2. Press key to select the edit sensor column and it will show "Add?".
3. Press key to start search the sensor.
4. In the meantime, select the channel in the sensor, then power up the sensor or press reset key of the
sensor to start pairing.
5. Once connected, the sensor icon, ID and signal strength will show on the channel row.
4.9.5.2 DELETE CURRENT SENSOR
1. In this section, press / key to select the connected sensor.
2. Press key to select the edit sensor column and it will show "Delete?".
3. Press key to delete the sensor.
27
4.9.4 UNIT SETTING
a
b
c
d
e
f
g
h
Sensor name column,
In this section, press / key to select the sub items.
# Sub item Operation
a Temperature
Press / to select ˚C or ˚F
b Baro pressure
Press / to select hPa, inHg or mmHg
c Baro type
Press / to select Relative or Absolute
d Rain
Press / to select mm or in
e Wind speed
Press / to select m/s, km/h, knots or mph
f Wind direction
Press / to select 16 direction or 360˚
g Light
Press / to select Klux, Kfc or W/m²
h Skin type
Press / to select Light, Medium or Dark skin type for exposure level
4.9.5 SENSOR STATUS & EDITING
Edit sensor column
Channel number
column
Sensor type column
Sensor ID column
Sensor name column,
you can name your
sensor in setup UI
4.9.5.1 ADD NEW SENSOR
1. In this section, press / key to select the empty channel.
2. Press key to select the edit sensor column and it will show "Add?".
3. Press key to start search the sensor.
4. In the meantime, select the channel in the sensor, then power up the sensor or press reset key of the
sensor to start pairing.
5. Once connected, the sensor icon, ID and signal strength will show on the channel row.
4.9.5.2 DELETE CURRENT SENSOR
1. In this section, press / key to select the connected sensor.
2. Press key to select the edit sensor column and it will show "Delete?".
3. Press key to delete the sensor.
# Sub item Operation
a Temperature Press
/ to select ˚C or ˚F
b Baro pressure Press
/ to select hPa, inHg or mmHg
c Baro type Press
/ to select relative or absolute
d Rain Press
/ to select mm or in
e Wind speed Press
/ to select m/s, km/h, knots or mph
f Wind direction Press
/ to select 16 direction or 360˚
g Light Press
/ to select Klux, Kfc or w/m²
h Skin type exposure level Press
/ to select light, medium, or dark skin type for exposure level
1. Press the up or down key to select the empty channel.
2. Press the right key to select the edit sensor column.
3. When the column shows the “Add” option, click the conrm key to start the sensor search.
4. Select the matching channel number on the sensor, then power on or press the RESET button to
start the pairing.
5. Once devices are connected, the sensor icon, ID, and signal strength will show in the channel row.
1. Press the up or down key to select the connected sensor.
2. Press the right key to select the edit sensor column.
3. When the column shows the “Delete” option, click the conrm key to delete the sensor.